نتایج جستجو برای: the flexural modulus and strength of glass fiber
تعداد نتایج: 25042283 فیلتر نتایج به سال:
Hybridization, especially where only variant natural lignocelluloses are combined, is fast receiving encouraging attention because it offers a range of properties that may be difficult to obtain with a single kind of reinforcement. In this study, tensile, flexural, and impact properties of hybridized kenaf/PALF-reinforced HDPE composite were studied. Sheets from which tensile, flexural, and imp...
objective: the objective of this study was to investigate the invitro fluoride release of four new self-adhesive resin cements; set (sdi, australia), breeze (pentron, usa), embrace wetbond (pulpdent, usa), g-cem (gc, japan) and to assess the bonding performance of these self-adhesive resin cements for bonding of orthodontic brackets. materials and methods: for fluoride release experiment, six ...
in civil engineering concrete is a material combined of hydraulic cement, sand, gravel and water. gravel and sand compose 60 to 70 percent of concrete. these aggregates support compression force of concrete. cement paste acts as glue to stick grain together. in bushehr factories producing aggregates do not operate according to astm standards, so that fineness modulus (fm) of the produced sands ...
Abstract Glass fiber is an important component of resin composites and greatly affects the properties materials. UV-cured pipe rehabilitation lining materials prepared by hand lay-up process using glass fibers with different areal densities weaving types were studied in this paper. Their thermal stability mechanical properties, such as flexural strength, modulus, tensile studied. The results sh...
an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...
some new water-soluble schiff base complexes of na2[m(5-so3-1,2-salophen)].nh2o; (5-so3-1,2-salophen = n,n’-bis(5-sulphosalicyliden)-1,2-phenylendiamine); na2[m(5-so3-2,3-salpyr)(h2o)n].2h2o; (5-so3-2,3-salpyr = n,n’-bis(5-sulphosalicyliden)-2,3-diaminopyridine); and na2[m(5-so3-3,4-salbenz)(h2o)n].nh2o; (5-so3-3,4-salbenz = n,n’-bis(5-sulphosalicyliden)-3,4-diaminobenzophenon); where m = cu, n...
A new method for preparing SWNT/epoxy nanocomposites has been developed which involves high shear mixing of the epoxy resin and SWNT and heat treating the mixture prior to introducing the hardener. The glass transition temperature of the epoxy resin is unaffected by the presence of nanotubes. An improvement of 17% in flexural modulus and 10% in flexural strength has been achieved at 0.05 wt% of...
This study evaluated the effect of fiber addiction in flexural properties of 30 wt% silica filled BisGMA resin (FR) or unfilled Bis-GMA (UR). Ten groups were created (N = 10) varying the resin (FR or UR) and quantity of glass fibers (wt%: 0, 10, 15, 20, and 30). Samples (10 × 2 × 1 mm) were submitted to flexural strength test following SEM examination. Data were analyzed by two-way ANOVA, Tukey...
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید