The AA6061-T6 aluminum alloy samples including annealed Fe78Si₉B13 particles were prepared by friction stir processing (FSP) and investigated by various techniques. The Fe78Si₉B13-reinforced particles are uniformly dispersed in the aluminum alloy matrix. The XRD results indicated that the lattice parameter of α-Al increases and the preferred orientation factors F of (200) plane of α-Al reduces ...

For selecting an alloy or material to be used for implant procedure, it is necessary to remember that, there is a number of factors like corrosion behavior, mechanical properties, biocompatibility and cytotoxicity, and also the availability and cost, while the aesthetic measures needed are in a second priority. The most important property is corrosion behavior as it is responsible for the conti...

Corrosion of concrete reinforcement members has been recognized as a predominant structural deterioration mechanism for steel reinforced concrete structures. Many corrosion detection techniques have been developed for reinforced concrete structures, but a dependable one is more than desired. Acoustic emission technique and fiber optic sensing have emerged as new tools in the field of structural...

High purity Flibe was prepared for corrosion study. Fundamental corrosion experiments in static condition were performed on the structural material for Flibe blanket and Material Research Loop, which is non-isothermal forced convection loop simulating the blanket condition. Corrosion rate for the structural materials in static condition was estimated as small as 0.83-5.4 μm/yr in the high purit...

A model was developed to determine the influence of steel corrosion products on a-radiolytic corrosion of spent nuclear fuel inside a failed waste container. The model takes into account the a-radiolysis of water, the reaction of radiolytic H2O2 with UO2 both directly and via galvanic coupling with noble metal particles, the reaction with H2 via galvanic coupling, and the Fenton reaction. The d...

The effectiveness of elemental iron (Fe(0)) to remove uranium (U) from the aqueous phase has been demonstrated. While the mitigation effect is sure, discrepancies in the removal mechanism have been reported. The objective of this study was to investigate the mechanism of U(VI) removal from aqueous phases by Fe(0). For this purpose, a systematic sequence of bulk experiments was conducted to char...

A Gaussian function is proposed to describe the non-uniform spatial distribution of corrosion products as measured from chloride-exposed reinforced concrete specimens using backscattered electron imaging and image analysis. The model provides a good fit to the observed data and limited data sets reported in the literature. Subsequently it is used as an input into a finite element analysis to pr...

In this paper, the reasons of damage water pumps parts of the air compressor cooling system were studied. To reach this goal, the works like preparing metallographic samples, evaluation of structure, investigation of mechanical properties, the alloy parts detection and chemical analysis of deposit and corrosion products collected from the parts were performed. According to studies and results o...

The proposed work will combine chemical kinetics and hydrodynamics in target and test-loop lead-bismuth eutectic (LBE) systems to model system corrosion effects. This approach will result in a predicative tool that can be validated with corrosion test data, used to systematically design tests and interpret the results, and provide guidance for optimization in LBE system designs. The task includ...

We report here on the mechanisms underlying the corrosion of weathering steel in accelerated laboratory tests using artificially polluted SO2-atmospheres. The role of corrosion parameters such as the SO2 concentration, the exposure time, the relative humidity and temperature of the environment are discussed in detail. Through the extensive use of Mössbauer spectroscopy in both its transmission ...