The present study shows the relationship between welding quality and optical-acoustic emissions from electric arcs, during welding runs, in the GMAW-S process. Bead on plate welding tests was carried out with pre-set parameters chosen from manufacturing standards. During the welding runs interferences were induced on the welding path using paint, grease or gas faults. In each welding run arc vo...

Robot automation systems are rapidly taking the place of the human work force. One of the benefits is that this change provides the human work force with the time to spend on more creative tasks. The highest population of robots is in spot welding, spray painting, material handling, and arc welding. Spot welding and spray painting applications are mostly in the automotive industry. However, arc...

During arc welding, the arc heats and melts the workpiece as heat flux. When the welding current is given, the distribution and the intensity of the heat flux are determined by the length of the arc. The measurement and control of the arc length are fundamental in robotic and automated welding operations. Length of welding arc determines the distribution of the arc energy and thus the heat inpu...

In this study, Submerged Arc Welding (SAW) and Gas Metal (GMAW) processes were used in multi-pass welding of 33 mm thickness super duplex stainless steel plates. Recommended higher than recommended arc energy interpass temperatures used. Both GMAW SAW able to produce large weldments meeting the microstructural, mechanical, corrosion resistance requirements, also when using temperature. It was p...

OBJECTIVES The objective was to quantify the blue-light hazard from CO(2) arc welding of mild steel. METHODS The spectral radiance of arcs in CO(2) arc welding of mild steel was measured for solid and flux-cored wires at welding currents of 120-480 A. Effective blue-light radiance and the maximum acceptable exposure duration were calculated from the spectral radiance using their definitions i...

A study was conducted on the arc and melting efficiency of the plasma arc, gas tungsten arc, gas metal arc, and submerged arc welding processes. The results of this work are extended to develop a quantitative method for estimating weld metal dilution in a companion paper. Arc efficiency was determined as a function of current for each process using A36 steel base metal. Melting efficiency was e...