In order to lower fuel consumption and reduce emissions, aluminum is being considered as an alternative to steel in large scale production of autobodies. This study evaluates the prospects of aluminum sheets as a cost efficient alternative to steel in autobodies with the unibody design. The study focuses on the processing technologies and alloy selection for aluminum automotive sheets and looks...

J. Matusiak, J. Wyciślik, Institute of Welding, Gliwice, Poland The article presents the results of research into the fume and gas emission during MIG/MAG arc weld brazing. Investigations were conducted for hot dip coated steel sheets with zinc and zinc and iron alloy coatings. Steel grades of DX 54D Z 100 MBO and DX 54D ZF 100 RBO were used during research. ARC shielding gases applied were Ar ...

The most important purpose of cold rolling processes, in addition to obtaining appropriate mechanical features, is to achieve very low and more precise thicknesses’, the issue that is not possible in hot rolling processes. Today, most cold rolling lines designed continuously and usually consist of 4 to 6 fourroller rolling rack. Finished surface of obtained sheets of cold rolling is Harder and ...

The most important purpose of cold rolling processes, in addition to obtaining appropriate mechanical features, is to achieve very low and more precise thicknesses’, the issue that is not possible in hot rolling processes. Today, most cold rolling lines designed continuously and usually consist of 4 to 6 fourroller rolling rack. Finished surface of obtained sheets of cold rolling is Harder and ...

This article describes a numerical study on the TOX-clinching process of the steel sheets. In addition, the influence of plastic anisotropy of the material on joining parameters is analyzed by evolution of the joint parameters such as undercut and neck thickness and punch force-displacement curve. Finite element analysis with ABAQUS/CAE-Explicit program is used to simulate two dimensional and t...

With growth the construction technologies, Cold-Formed Steel, CFS, sections are widely used in ordinary steel buildings because of some advantages such as light weight, ease of installation, decrease in cost, and increase in speed of operation. Using the bolted connections for CFS joist is one of the best details for steel structures. The main objective of this study is to conduct an experiment...

The magnetic properties of steels are affected by plastic deformation, because the domain wall processes magnetoelastically interact with the dislocations and the residual stresses. The evolution of the magnetic hysteresis loop and its parameters with the type and degree of straining can thus provide a macroscopic signature of the underlying the mechanical and structural properties. Additional ...

Failure in sheet metal structures of ductile material is usually caused by one of, or a combination of, ductile fracture, shear fracture or localised instability. In this paper the failure of the high strength steel Docol 600DP and the ultra high strength steel Docol 1200M is explored. The constitutive model used in this study includes plastic anisotropy and mixed isotropic-kinematic hardening....

Abstract. The mechanical and damage behavior of a X100 steel after prestrain is studied in this work. Experimental results show both a plastic and rupture anisotropy: the T direction exhibits a higher ultimate stress but the lowest ductility and toughness. Prestrain reduces ductility and crack growth resistance. A model able to represent the plastic and damage behaviour of the material before a...