نتایج جستجو برای: steel plates
تعداد نتایج: 115271 فیلتر نتایج به سال:
Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa (78-90 Ksi) range depending on thickness, ultimate tensile strength in the 625-690 MPa (90100 Ksi) range, and 25-30% elongation when air cooled after hot rolling. No brittle heat-affected zone was formed during manual or automatic submerged arc welding without pre-heating or postheating. The fract...
In general, plates are classified as thick when the minimum dimension to thickness ratio (b/h) is less than 10, thin b/h ranges from 10 about 100, provided that plate maximum deflection (w/h) 0.2, and membranes approaches 100 w/h ≥ 0.2. Thick develop internal stress resultants governed by three-dimensio...
Here we present a method to manufacture peptide-concentrating MALDI-plates with alkyl ketene dimer (AKD) as a new superhydrophobic coating. The fabrication of the hydrophobic plates included application of AKD by airbrush, and negative contact printing to generate the concentration sites. Deposited sample droplets were contained within the prestructured sites, and self-adjusted onto the site if...
+Moriarty, T F; Debefve, L; Boure, L; 1, Richards, R G. +AO Research Institute, Davos, Switzerland, 2 Cardiff School of Biosciences, Cardiff University, Wales. Senior author [email protected] Introduction: Polishing the surface of internal fracture fixation (IFF) devices composed of titanium (Ti) or titanium aluminium niobium (TAN) has been found to reduce soft tissue adhesion and...
These kinetic mechanisms of eukaryote cells (type Dictyostelium discoideum) were tested in a two-plate cell detachment assay with the coated substrates as test plates and stainless steel discs as counter plates. The suspension of the cells in Sörensen buffer rested between the two plates, retained by the balance between gravity and capillary forces. All coatings influenced the cells leading to ...
Thin plates are subject to several imperfections (including dents) which reduce the ultimate strength of plates. In this work, nearness effect of two short dents of same size on the ultimate strength of a thin square steel plate is numerically investigated. Dents are modeled on the FE surface of the undented plate by varying the location and orientation of dents and the centre distance between ...
The conventional strengthening strategy on the connection between the steel pile cap and reinforced concrete footing requires a series of complicated processes such as the distribution of reinforcing bars, their anchorage into concrete, and the usage of shear keys. This study investigates the structural performance of steel pile caps strengthened with newly proposed perfobond shear connectors s...
microalloyed s355n steel plates are extensively used in bridge and high-rise building structures. one ofthe factors affecting the mechanical properties is the size and morphology of inclusions. in this research,microalloyed s355n steel plates with different sizes of inclusions were examined. one contained longmanganese sulfide inclusions (li material) and the other had short ones (si material)....
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید