Polypyrrole (PPy) has been prepared by oxidative polymerization of pyrrole and used as a raw material for the preparation N-doped activated carbons. Thus, PPy pyrolyzed at 900 °C then with steam under different activation conditions (time temperature). This allowed carbons porosity development nitrogen content, well distinctive distribution species. It observed that presence functionalities fav...

Superheated steam drying technique has been known for a long time, but its application to food drying has received little attention. In this work, superheated steam was applied to dry fresh parsley (Petroselinum Cripsum). A mathematical model to simulate this drying process was developed by using mass and energy conservation equations for solid and steam phases. The resulting partial differenti...

Forced convective condensation in vertical channel is investigated numerically. The condensation boundary layers that occur due to temperature difference between the walls and saturation temperature of steam is simulated by the volume of fluid (VOF) method. The effect of variations in the hydraulic diameter, steam velocity, Re number and temperature difference between the wall and saturation te...

The objective of this study was to investigate the effects of manufacturing conditions on the adsorption capacity of heavy metal ions by Makino bamboo charcoal. Results show that the specific surface area and iodine number of bamboo charcoal activated at 900 degrees C were larger than those of bamboo charcoal activated at 800 degrees C. The specific surface area of bamboo charcoal activated at ...

Abstract With the development of simulation technology and programs, it became necessary to study models that control equations’ solutions influence results. The having over solving equations multiple phases materials are investigated. They include (Volume Fluid (VOF), mixture, Eulerian) controlling governing equations. was conducted depending on boiling point water. activation these three is c...

To assess the potential impact of using hafnium as absorber material in LWRs high temperature accidental situations, oxidation behavior was studied up to 1400°C, i.e. at conditions relevant severe accidents. Different sample geometries were tested and oxidized steam/argon mixtures, either a furnace or thermogravimetric analyzer. Metallographic examinations, hydrogen measurements EPMA oxygen pro...

This paper presents entropy generation minimisation model of combined heat and power system. The turbine control valves and heater throttle valves were analysed. The high-pressure control valves regulate the mass flow rate of steam into the turbine, whereas the intermediate-pressure and lowpressure control valves the steam pressure of the turbine extracts 3 and 5. The steam of the turbine extra...

the biqian-10 block, located in henan oilfield of sinopic, contains many thin and interbedded reservoirs, which have been operated by cyclic steam stimulation for 20 years or more. therefore, it is a challenge to implement the conventional steam flooding. in order to improve the recovery of steam flooding, urea was used to assist steam flooding. urea can decompose into co2 and nh3, which are be...

This work presents the hydrogen production from steam gasification of palm kernel shell (PKS) at 700 C in the presence of 5% Ni/BEA and 5% Fe/BEA as catalysts. The steam gasification was performed in two-staged reactors to evaluate the effect of calcinations temperature and the steam to biomass ratio on the product gas composition. The catalytic activity of Ni/BEA catalyst decreases with increa...

Abstract Steam-water capillary pressure is often either ignored or determined artificially in geothermal reservoir engineering. However steam-water capillary pressure plays an important role in geothermal reservoir performance and may not be substituted by air-water capillary pressure. To this end, preliminary mathematical models have been developed to calculate drainage and imbibition steam-wa...