Optical interferometric monitoring of spin coating (optospinography) has allowed close observation of the temporal evolution of a thin silicate sol film (typically at 2000 rpm, 100 Hz data acquisition). The kinematic viscosity data obtained, using a simple analytical model, are validated with those from a mineral oil standard, with agreement well within the experimental uncertainties. For spin ...

DOI: 10.1002/admi.201600780 coat uniform electron beam resist on nonflat surfaces. Unlike spin-coating technique, spray coating method,[14] and Langmuir–Blodgett (LB) technique[15] may be employed to coat resist on nonplanar surfaces, but they have several limitations including sample should be free from sharp corners or edges for spray coating, and very few materials are usable as e-beam resis...

We present herein the novel technique for constructing inverted cell-adhesion patternes on PEG gel modified glass surfaces by photoirradiation using the same photomask and materials. The PEG gel micropatterns were prepared by a photolithographic technique using a photomask with 100 microm aligned cavities after spin-coating of a mixed solution of alpha,omega-dimethacryloyl-PEG (PEG-DMA) and a p...

In this paper, different morphology and optical properties of poly (methyl methacrylate) (PMMA) thin films were investigated. Films were fabricated by spin coating under different preparation condition. PMMA polymers with molecular weight ranged from 15,000 to 996,000 were prepared in solution with various concentration ranged from 5.0 to 20.0 wt. %. The spin coating speed was controlled at 1,0...

In this paper, two-step sequential spin-dip and spin-spin coating, as well as one-step spin coating, methods are used to fabricate methylammonium lead mixed-halide perovskites to study the effect of process parameters, including the choice of the solvent, annealing temperature, spin velocity, and dipping time on the characteristics of the perovskite film. Our results show that using a mixture o...

Spin-coating has been used extensively in the fabrication of electronic devices; however, the effects of the processing parameters have not been fully explored. Here, we systematically characterize the effects of the spin-coating time on the microstructure evolution during semiconducting polymer solidification in an effort to establish the relationship between this parameter and the performance...

nanosized tio2 particles were prepared by sol–gel method. the tio2 particles were co-deposited with chromium using electrodeposition technique. in investigating of coating surfaces by scanning electron microscope (sem), the results showed that the morphology of the coating surface was changed by adding tio2 nanoparticles to the chromium coating. the corrosion behavior of the coatings was assess...