The steady–state operation of the autothermal reformer is simulated as two reactors in series by means of a detailed mathematical model. An input-output model is selected to describe the upper combustion chamber. The possible occurrence of homogeneous steam reforming and watergas-shift (WGS) reactions is considered. The catalyst bed is represented through a one-dimensional heterogeneous model, ...

Fuel cell powered electric cars using on-board methanol or hydrocarbon reforming to produce a hydrogenrich gas represent a low-emissions alternative to gasoline internal combustion engines (ICE) with well-towheel efficiencies of 17 %. For the overall methanol process, a simplified model of the reaction network consisting of the total oxidation of methanol, the reverse water-gas shift reaction, ...

A large number of theoretical and experimental studies have shown that the performance of kerosene combustion increases significantly if combustion is being assisted by the addition of hydrogen to the fuel/air mixture during the combustion process. It reduces the amount of CO, CO2 and NOx emissions, while increasing the flame stability limits. It also helps in bruning fuel/air mixtures at much ...

In this work, an experimental study of biomass gasification in different operation conditions has been carried out in an updraft gasifier combined with a porous ceramic reformer. The effects of gasifier temperature, steam to biomass ratio (S/B), and reforming temperature on the gas characteristic parameters were investigated with and without porous ceramic filled in reformer. The results indica...

Future large-scale production of H2 for use as a clean fuel will likely depend upon gasifying coal or biomass followed by steam reforming the resulting gas mixture and separating the CO2 byproduct. The process of steam reforming and CO2 separation can be greatly simplified by utilizing a new material that combines a reforming catalyst with a sorbent for CO2. Such a material was prepared in the ...

Hydrogen demand in refineries is increasing vigorously due to the stringent transportation fuel specifications, furthermore the interest in the so-called hydrogen economy developed in the recent years put the hydrogen as energy carrier in the centre of a growing interest. More than 95% of the hydrogen for refinery use is nowadays produced via hydrocarbon steam reforming, where Foster Wheeler pl...

Workers operating in the oil and gas exploration industries are at risk for exposure to sour gas—gas containing H2S (hydrogen sulfide) at potentially toxic levels. Operations located in densely populated areas pose additional threats of exposure to the general public. The danger can develop over time, even if the gas source was initially “sweet” (low in H2S). Local and national regulations defi...

Aqueous phase reforming of glycerol was studied over a series of γ-Al2O3 supported metal nanoparticle catalysts for hydrogen production in a batch reactor. Of the metals studied, Pt/Al2O3 was found to be the most active catalyst under the conditions tested. A further systematic study on the impact of reaction parameters, including stirring speed, pressure, temperature, and substrate/metal molar...

Catalytic steam reforming of glycerol for H(2) production has been evaluated experimentally in a continuous flow fixed-bed reactor. The experiments were carried out under atmospheric pressure within a temperature range of 400-700 degrees C. A commercial Ni-based catalyst and a dolomite sorbent were used for the steam reforming reactions and in situ CO(2) removal. The product gases were measured...

Fuel flexibility is a significant advantage of solid oxide fuel cells (SOFCs) and can be attributed to their high operating temperature. Here we consider a direct internal reforming solid oxide fuel cell setup in which a separate fuel reformer is not required. We construct a multidimensional, detailed model of a planar solid oxide fuel cell, where mass transport in the fuel channel is modeled u...