In this research, mechanical alloying was used to produce Ti-50Al, Ti-45Al-5Cr and Ti-45Al-5W (at%) alloys. The effect of ternary addition (Cr and W) on microstructure and production efficiency of TiAl alloy were investigated. Alloying was performed in a planetary mill and the milling time varying from 5 to 70h. The structural evaluation in these powders was done by X-ray diffraction (XRD) tech...

In this study, the effect of variety of Nano- additives doping on the hydration resistance of the MgO-CaO system was investigated. Samples were prepared from calcined dolomite and magnesite. Nano-additives that contained cations with various valences (trivalent and tetravalent) used as  a dopant. The bulk density, apparent porosity and hydration resitance were studied and evaluated. Also, phase...

In this study, AlCrN coatings were deposited using modulated pulsed power magnetron sputtering (MPPMS) with different power pulse parameters by varying modulated pulsed power (MPP) charge voltages (350 to 550 V). The influence of power pulse parameters on the microstructure, mechanical properties and thermal stability of the coatings was investigated. The results indicated that all the AlCrN co...

Nanoparticles of palladium-doped cerium oxide (Pd–CeO2) have been prepared by aqueous co-precipitation resulting in a single phase cubic structure after calcination according to X-ray diffraction (XRD). Inhomogeneous strain, calculated using the Williamson–Hall method, was found to increase with palladium content, and the lattice contracts slightly, relative to nano-cerium oxide, as palladium c...

INTRODUCTION Since McCormick [1] introduced a method for deoxyribonucleic acid (DNA) extraction, known as solid-phase extraction (SPE), SPE using silica material [2] has become an essential technology for integrated point-of-care (POC) microsystem [3]. Recently, Price et al. provided an overview of these techniques [4], however it is still not easy to find the optimal solution for the microflui...

We report the microstructure and gas-sensing properties of a nonequilibrium TiO(2)-SnO(2) solid solution prepared by the sol-gel method. In particular, we focus on the effect of Cd doping on the sensing behavior of the TiO(2)-SnO(2) sensor. Of all volatile organic compound gases examined, the sensor with Cd doping exhibits exclusive selectivity as well as high sensitivity to formaldehyde, a mai...

Brazing of an austenitic-martensitic stainless steel (AMSS) with pure silver was carried out at 1053 K, 1073 K, and 1093 K (780 C, 800 C, and 820 C) with Ag-27Cu-5Sn (wt pct) as brazing filler material (BFM). Wettability of the liquid BFM over base AMSS surface was found to be poor. Application of nickel coating to the steel was observed to enhance the wettability and to enable the formation of...

in the present study, the effect of porosity on the cathode microstructure (50:50 wt. % lsm: ysz) of a solid oxide fuel cell (sofc) has been examined. a 3-d finite element method for mixed ionic and electronic conducting cathodes (miec) is presented to study the effects of porosity on cell performance. each microstructure was realized using the monte carlo approach with the isotropic type of gr...

titanium nitride-copper (tin-cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. the influence of cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. structural properties of the films were studied by x-ray diffraction pattern. topography of t...