The level structure of 25 Al has been studied at the ORNL Holifield Radioactive Ion Beam Facility (HRIBF) by measuring the angular and energy distributions of alpha particles from the 28 Si(p,α) 25 Al reaction. Proton beams (~10 nA) at laboratory energies of 40-and 42-MeV were generated by the 25 MV tandem accelerator and bombarded a natural silicon target (50 µg/cm 2). Alpha particles were det...

We suggest a method for efficient (high-coverage) grafting of organic molecules onto photoluminescent silicon nanoparticles. High coverage grafting was enabled by use of a modified etching process that produces a hydrogen-terminated surface on the nanoparticles with very little residual oxygen and by carefully excluding oxygen during the grafting process. It had not previously been possible to ...

BACKGROUND Porous silicon particles (PSiPs) have been used extensively as drug delivery systems, loaded with chemical species for disease treatment. It is well known from silicon producers that silicon is characterized by a low reduction potential, which in the case of PSiPs promotes explosive oxidation reactions with energy yields exceeding that of trinitrotoluene (TNT). The functionalization ...

This work reports on the first time experimental investigation of temperature field inside silicon substrates under particle-induced near-field focusing at a sub-wavelength resolution. The noncontact Raman thermometry technique employing both Raman shift and full width at half maximum (FWHM) methods is employed to investigate the temperature rise in silicon beneath silica particles. Silica part...

Cone-shaped nanostructures of mixed composition (nanocones) and largely graphitic nanofibers were synthesized on silicon substrates using iron/platinum alloy nanoparticles as the catalyst in a direct-current plasma enhanced chemical vapor deposition reactor. The catalyst nanoparticles were monodisperse in size with an average diameter of 3 (±1) nm. The nanocones were produced on laterally widel...

Porous structured silicon or porous silicon (PS) powder was prepared by chemical etching of silicon powder in an etchant solution of HF: HNO₃: H₂O (1:3:5 v/v). An immersion time of 4 min was sufficient for depositing Cu metal from an aqueous solution of CuSO₄ in the presence of HF. Scanning electron microscopy (SEM) analysis revealed that the Cu particles aggregated upon an increase in metal co...

We report on the laser ablation of composite prismatic structures using a vacuum ultraviolet (VUV) 157 nm F2 laser. Polycarbonate and CR-39 substrates have been intentionally seeded with silver wires and silicon carbide whiskers respectively. The seed particles remain attached to the underlying substrate after laser ablation, forming composite silver-polycarbonate and silicon carbide-CR-39 inte...

We present the fabrication and first experimental results of a microfluidic droplet dispenser with electrical impedance detection of single cells. The microdispenser features microchannels, two sets of parallel facing electrode pairs and an on-demand droplet generator. It has been fabricated by sandwiching dry film photopolymer (TMMF) between silicon and Pyrex substrates. The channels and dosag...

Silicon and graphene are promising anode materials for lithium-ion batteries because of their high theoretical capacity; however, low volumetric energy density, poor efficiency and instability in high loading electrodes limit their practical application. Here we report a large area (approximately 15 cm × 2.5 cm) self-standing anode material consisting of molecular precursor-derived silicon oxyc...

Nano-silicon is a nanostructured material in which quantum or spatial confinement is the origin of the material's luminescence. When nano-silicon is broken into colloidal crystalline nanoparticles, its luminescence can be tuned across the visible spectrum only when the sizes of the nanoparticles, which are obtained via painstaking filtration methods that are difficult to scale up because of low...