As waves travel and shoal towards a beach, their surface elevation becomes peaky (sharp crests) and asymmetric relative to the vertical. Within a wave period, the corresponding orbital velocity near the bottom shows a similar (time) variation and it is recognized that these nonlinearities are responsible for sediment transport. The resulting wave-induced bottom shear stresses are required for m...

The stability evaluation of the slope commonly uses limit equilibrium methods, for example, Fellenius’ method in Japan. The limit equilibrium methods have two limitations. (1) It is necessary to divide the sliding mass into slices, and to set up some additional equations to make the problem statically determinate. (2) It is necessary to search sliding surface with a minimum safety factor. Shear...

Simulations of the flow of concentrated aggregated colloidal systems, at the particulate level, are used to investigate the distribution of stresses in the shear-thinning regime. It is found that the distribution of shear stress carried by interparticle bonds decays approximately exponentially at large stresses, but with a double-exponential distribution for values of positive stress. The micro...

In open channel, canals and rivers, a rapid increase in flow depth will induce a positive surge, also called bore or compression wave. The positive surge is a translating hydraulic jump. Herein new experiments were conducted in a large-size rectangular channel to characterise the unsteady turbulent properties, including the coupling between free-surface and velocity fluctuations. Experiments we...

The purpose of this research was to determine the shear strength of a unidirectional carbon-®bre/epoxy composite by means of the 10 o€-axis and 0 Iosipescu specimens subjected to shear. Detailed non-linear ®nite-element computations of these two tests were conducted, taking into account the actual non-linear material behavior of the composite. The tests were compared in terms of stresses and st...

When loaded in simple shear deformation, polymeric materials may develop so-called normal stresses: stresses perpendicular to the direction of the applied shear. These normal stresses are intrinsically nonlinear: basic symmetry considerations dictate they may only enter at O(γ(2)), with γ the dimensionless shear strain. There is no fundamental restriction on their sign, and normal stresses may ...

In this paper the variation of normal and shear stresses along a path defined on the bone-dental implant interface is investigated. In particular, the effects of implant diameter, collar length and slope, body length, and the effects of four different types of external threads on the interfacial stress distribution are studied. The geometry of the bone is digitized from a CT scan of a mandibula...

Biomass tensile and shear ultimate failure stresses were measured with the aim of identifying biomass ‘‘weakest mode of failure’’ or ‘‘natural fracture point’’ as a basis for future grinder designs. Switchgrass (Panicum virgatum L.) ultimate stresses were determined for Alamo and Kanlow varieties over ranges in maturity and moisture content. Alamo had greater ultimate tensile stress than Kanlow...

Interstitial flow is an important regulator of various cell behaviors both in vitro and in vivo, yet the forces that fluid flow imposes on cells embedded in a 3D extracellular matrix (ECM), and the effects of matrix architecture on those forces, are not well understood. Here, we demonstrate how fiber alignment can affect the shear and pressure forces on the cell and ECM. Using computational flu...

We perform molecular dynamics simulations on a bead-spring model of pure polymer grafted nanoparticles (PGNs) and of a blend of PGNs with a polymer melt to investigate the correlation between PGN design parameters (such as particle core concentration, polymer grafting density, and polymer length) and properties, such as microstructure, particle mobility, and viscous response. Constant strain-ra...