grade control structures are hydraulic structures used to stabilize a river bed. scour downstream of this structure is the main cause of its failure. studies have developed numerous empirical relations for scour depth prediction that designers must choose between to decide the most effective equation for a specific application. this study tested the condition of submerged jets over beds of sedi...

Bridge Scour is one of the major causes of bridge failures all around the world and there have been significant efforts for its detection and measurement using different acoustic approaches. In this paper, we propose and investigate an effective method to utilize Received Signal Strength (RSS) for measuring scour depth where acoustic sensors are deployed. We also extend a statistical testing to...

stable pile depth in the Snowy River study (SKM 2005) is outlined. The inputs used in the run of the LLP99 model were: • single soil layer, • very high flexural stiffness of pile (1,000,000 kN/m). • pile width = 0.3 m (i.e. wooden pile), • shear strength in the absence of lateral stress (for unconsolidated sand 150 kN/m was used), • effective unit weight of soil (15 kN/m), • active lateral effe...

local scouring around bridge piers is a natural phenomenon caused by the erosive process of flowing stream on alluvial beds. the 3d flow field around bridge piers interacting with the bed materials increases complexity of local scour process. the local scour depth develops in accelerated flows and if it is not predicted correctly, the bottom level of local scour hole will exceed the original le...

Rigid-lid approximation is usually used to replace the free surface in scour simulation. The influence of the rigid lid assumption on the prediction precision of scour hole in steady flow is studied in this paper. Firstly, a local scour model was constructed based on the open sources Computational Fluid Dynamics (CFD) model OpenFOAM, where both the bed load and suspended load were considered. I...

An improved neuro-fuzzy based group method of data handling using the particle swarm optimization (NF-GMDH-PSO) is developed as an adaptive learning network to predict the localized scour downstream of a sluice gate with an apron. The input characteristic parameters affecting the scour depth are the sediment size and its gradation, apron length, sluice gate opening, and the flow conditions upst...

Simulation of scour-pit formations under the bridge decks and around the bridge piers, due to sediment suspension and transport caused by flooding and pressure flow conditions, is of significant interest nowadays to computational fluid dynamics (CFD) and hydraulic researchers. From CFD perspective, analysis of bridge under various flooding conditions and impact of the drag and lift forces on it...

The "vertical drop Structure" is one of the basic types used in channel system flow. Drops are used as slope breakers in some parts of channels where we encounter supercritical slopes. Scour is a dynamic phenomenon that is visible in vertical drop tail water depth. Because of complexity of Scour process and simultaneous testing of variables’ effective compliance, studies are still underway to d...

scour around bridge piers is one of the most important fields of hydraulic research. local scour around bridge piers and abutment is one of the main reasons of bridge failures. in the field of scour at the bridges, researches are more focus on scour of piers in compare with abutment. while the available information on the bridge failures required cost, the major problems are related to abutment...

Proper estimation of sediment movement is very critical for the management alluvial rivers. Computing transport with single particle size possible. However, particles on river bed and in have a distribution. It important to estimate material change, such as armoring, case scour. In this study, applicability sorting method, which available HEC-RAS, was analyzed. Bed methods divide into two or th...