The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...

Abstract Diamond-like carbon (DLC) films are deposited on rubber surfaces to protect the components, and surface pretreatment of substrates prior film deposition can improve adhesion between DLC rubber. Thus, principal purpose this work concentrates determining effects argon (Ar), oxygen (O 2 ), nitrogen (N hydrogen (H ) plasma pretreatments friction performance (DLC/rubber). The results indica...

We have measured the friction force acting on a rubber block slid on a concrete surface. We used both unfilled and filled (with carbon black) styrene butadiene (SB) rubber and have varied the temperature from -10 °C to 100 °C and the sliding velocity from 1 μm/s to 1000 μm/s. We find that the experimental data at different temperatures can be shifted into a smooth master-curve, using the temper...

three piece bogies are widely in use by the freight railway services throughout the world. in comparison with the other freight bogies they cost less and are easier to maintain. however, they do not exhibit favorable curving behavior. amongst the methods to improve the bogie performance is the proposal to introduce lateral clearance in the bogies’ axleboxs. in the case of the three piece bogies...

There are several parameters that have significant influence in metal forming process. One of the most important of them is friction coefficient. Friction can change the pattern of metal flow and the force needed for deformation. It is necessary to determine the friction coefficient to study the effect of friction on metal forming process. This study is concerned with numerical and experimental...

background & aim: increasing economic role of medicinal herbs in recent society and complexity of modern technologies in production (planting and harvesting), transportation, storage, processing, quality evaluation, distribution, marketing and consumption of these products require a thorough understanding of their physical properties. coefficient of friction of plant on the various surfaces...

in this research, an apparatus was made and utilized to determine the friction coeffi-cient of chickpea grains on steel surfaces. experiments were carried out on two black and galvanized surfaces and at four sliding velocities of 5, 20, 100 and 500 mm/min, at three moisture content of 7.5%, 15% and 21% wet basis (w.b.) and at three vertical pressure values of 14.28, 100 and 150 kpa. the followi...

polyvinyl ester green composites were synthesized with walnut shell powder (wsp) by in-situ polymerization technique. the green composites have been evaluated for mechanical properties such as tensile strength, tensile modulus and hardness. sliding wear loss, specific wear rate and coefficient of friction were investigated by using computerized pin-on–disc machine at normal applied loads of 20,...