The implementation of hydrogenotrophic denitrification is limited due to safety concerns, poor H2 utilization and low solubility of H2 gas with the resulting low transfer rate. The current paper presents the main research work conducted on a pressurized hydrogenotrophic reactor for denitrification that was recently developed. The reactor is based on a new concept suggesting that a gas-liquid eq...

Networks C. A. Schweiger and C. A. Floudas1 Department of Chemical Engineering, Princeton University, Princeton, NJ 08544-5263, USA Abstract{The synthesis of optimal reactor networks using a superstructure based approach is considered. The fundamental units in the superstructure are the continuous stirred tank reactor (CSTR) and a cross ow reactor (CFR). The mathematical modeling leads to an op...

−− A previously developed deterministic steady state module for modeling methanogenic biofilm reactors has been revised to enlarge the model application range and to deal with system dynamics. Two models for the hydrolysis of non-active biomass representing extreme alternatives: without biomass hydrolysis (model A) and with complete and instantaneous hydrolysis of non-active suspended and attac...

Leevijit, T., Wisutmethangoon, W., Prateepchaikul, G., Tongurai, C., Allen, M. Design and test of a continuous reactor for palm oil transesterification Songklanakarin J. Sci. Technol., 2006, 28(4) : 791-802 The continuous reactor for transesterification of refined palm oil with methanol was designed and tested. The reaction condition was focused at ambient pressure, temperature of 60oC, molar r...

  In this paper, modeling and optimization of Fischer-Tropsch Synthesis is considered in a fixed-bed catalytic reactor using an industrial Fe-Cu-K catalyst. A one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. The effects of temperature, pressure, H2 to CO ratio in feed stream, and CO molar flow on the mass flow r...

OO Concepts for Process Modelling and Simulation — An object-oriented (OO) modelling approach which associates a detailed representation of the process structure and of the transformations that the material in the structure undergoes is presented through the illustrative example of a reactor. The structural decomposition of the process devices gives rise to the concepts of elementary devices an...

This paper highlights the capability and potential of a recently-introduced method of designing modelpredictive safety (MPS) systems (Mohseni Ahooyi et al., 2016). For the first time, the method proposed a systematic utilization of process models to generate predictive alarm signals (alerts) for the detection of present and future operation hazards (OHs) in real time. An MPS system uses a proce...

In this research, modeling, simulation, and control of a methanol-to-olefins laboratory fixed-bed reactor with electrical resistance furnace have been investigated in both steady-state and dynamic conditions. The reactor was modeled as a one-dimensional pseudo-homogeneous system. Then, the reactor was simulated at steady-state conditions and the effect of different parameters including...