Different rotational CARS techniques have been evaluated in terms of single-shot temperature accuracy and signal intensity in room temperature nitrogen and in flames. The different techniques include both dual broadband techniques, using one or two broadband dye lasers, and conventional rotational CARS with different dye lasers. These techniques are also compared with vibrational CARS concernin...

fe3o4 magnetic nanoparticles modified with 1-octyl-3-methylimidazolium bromide([c8mim]-fe3o4) were used for the removal of reactive red 141 (rr141) and reactive yellow 81 (ry81) as model azo dyes from aqueous solution. the mean size and the surface morphology of the nanoparticles were characterized by tem, xrd and ftir techniques. adsorption studies of two dyes were performed under different ex...

textile industry is the major source of water consumption and wastewater pollution.there are various treatment techniques to remove textile wastewater pollution. coagulationflocculation is a widely used process to remove pollution due to suspended particles. in this research, different coagulants like alum, lime, fecl3, feso4 and mgcl2 were applied to select the suitable ones with optimum remov...

in this study, the photocatalytic degradation of methyl orange and congo red dye was investigated inaqueous solution using c,n,s-tridoped sno2 nanoparticles as a nano photocatalyst. the degradationwas carried out under different conditions including the photocatalyst amount, initial concentrationand ph of the solution. the results indicated that the degradation of methyl orange and congo redwas...

background: in this study, adsorbentn process performance was assessed using nickel oxide nanoparticles for wastewater treatment containing mono azo orange ii dye in a laboratory scale. methods: the effects of various factors such as adsorbent dosage, contact time, ph and initial dye concentration were investigated. findings: based on the obtained results, the optimum ph range to dye removal is...

In This applicable research, investigating absorption of process ofErythrosine dye on Copper oxide Nano particles Adsorbent was studied. First, prepared dyeconcentrations of 6, 8 and 12 mg L-1 and then effects of parameters such as concentrations ofinitial dye, time and pH on dye absorption efficiency were investigated.The dyeconcentrations in different samples were measured via spectrophotomet...

Abstract Background and purpose:The main objectives of this research were to evaluating the application of electrocoagulation process for 198 dye from the aqueous phase and determining the optimum operating conditions to the dye removal using aluminum and iron electrodes. Materials and Methods:The present study was conducted in bench-scale. The spectrophotometer DR 5000 was used to determine th...

Introduction: Since some dyes and their metabolites have toxicity and carcinogenicity potential, and are dangerous to the health of different living creatures, discharge of untreated wastewaters containing large concentrations of dye compounds into water resources is one of the important environmental problems. Therefore, in this research, the efficiency of chemical coagulation process was inve...

Tunable pores (TPs) have been used for resistive pulse sensing of 1 μm superparamagnetic beads, both dispersed and within a magnetic field. Upon application of this field, magnetic supraparticle structures (SPSs) were observed. Onset of aggregation was most effectively indicated by an increase in the mean event magnitude, with data collected using an automated thresholding method. Simulations e...

We show for the first time, to our knowledge, that the buildup time to steady-state femtosecond pulses in a typical colliding-pulse mode-locked dye laser (lambda = 620 nm) with compensating prisms is 15 microsec after the pulses have been completely modulated. For a similar laser without the compensating prisms, the buildup time is 40 microsec and exhibits interesting oscillatory behavior in th...