Antegrade telescoping rods have been introduced for use in pediatric patients with osteogenesis imperfecta (OI) to decrease the incidence of long-bone fractures and to correct and prevent deformities. Recent studies have documented failures of telescoping intramedullary rods due to inadequate distal fixation. The purpose of this study was to evaluate the pullout strength of distal fixation of t...

Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimat...

The purpose of this study was to determine the change of fixation strength after adjusting the height of polymethylmethacrylate (PMMA)-augmented pedicle screws.Cement-augmented cannulated pedicle screws with or without PMMA augmentation with a radial hole in the distal third of the screw thread were inserted into synthetic bone blocks used to model osteoporosis. Screws were left unchanged (in s...

pedicle screws provide rigid fixation for instabilities in the lumbar and lumbosacral spine. anatomical consideration and potential risk of neurologic complications are the reasons to hesitate using pedicle screws in the thoracic spine. twenty moulages similar to human vertebrae were instrumented with cotrel-dubousset (cd) system pedicle screw by intratransverse process, extrapedicular and intr...

OBJECT In 2009, Santoni et al. reported cortical bone trajectory (CBT) as a method of inserting pedicle screws to obtain more solid fixation, and proposed the use of cortical trajectory screws with a more closely placed thread (cortical screws) for CBT. Since the entry trajectory in CBT differs from that in the traditional trajectory, it is unclear whether the increased strength derives from th...

Marquees are temporary light structures that are connected to the ground by tensile anchors to resist forces imposed by wind acting on the structure. Failures of such structures are not rare and have resulted in deaths and tens of thousands of dollars of damage. Consequently, an accurate estimation of the ultimate pullout capacity of ground anchors is essential; however, current methods for est...

OBJECTIVE To study the impact of screw orientation on the pullout strength of OsteoMed M3 titanium screws in expansive unilateral open-door laminoplasty of the cervical spine. METHODS Six fresh human cervical spine specimens were randomly numbered and OsteoMed M3 plate and screws were used for an expansive unilateral open-door laminoplasty. The screws were inserted in the lateral mass at diff...

Expansive pedicle screws significantly improve fixation strength in osteoporotic spines. However, the previous literature does not adequately address the effects of the number of lengthwise slits and the extent of screw expansion on the strength of the bone/screw interface when expansive screws are used with or without cement augmentation. Herein, four designs for expansive pedicle screws with ...

BACKGROUND Intrapedicular fixation in thoracic spine is often limited, because of high risk of complication, especially in scoliosis patients. Extrapedicular screws fixation techniques provide an alternate solution for extremely small or abnormal thoracic pedicles deformity. However, the pullout resistance of extrapedicular screws has not been clearly defined. The aim of our study was to system...