In this paper, a new structure for buck-boost Z-source converter based on Z-H topology is proposed. The proposed converter consists of two LC networks similar to the conventional Z-source and Z-H converters. One of the characteristics of the proposed structure is that, without any changing in its’ power circuit, it can be used in different conversions such as dc/dc, dc/ac and ac/ac. This unique...

This paper demonstrates an enhancement of power quality in grid integrated systems with the help of the proposed control strategy for voltage source converter based active power filters. The Shunt Active Power filters (SAPF) are extensively utilized in modern grid integrated systems to diminish the power quality concerns associated with it. The SAPF is one of the various power filters, which ha...

A hybrid alternate current/direct current (AC/DC) microgrid consists of an AC subgrid and a DC subgrid, and the subgrids are connected through the interlink bidirectional AC/DC converter. In the stand-alone operation mode, it is desirable that the interlink bidirectional AC/DC converter manages proportional power sharing between the subgrids by transferring power from the under-loaded subgrid t...

This work describes the main consideration in the design of power converter for a SRM drive with the particular attention to the choice of converter topology, and to study and develop the static and dynamic characteristics of the prototype model of SRM using FEA software (MagNet 6. 22). To simulate the power converter switching circuit for prototype model of SRM using MATLAB/Simulink 7. 8. 0. I...

This paper presents a new Power Electronic Building Block (PEBB) designed to facilitate the implementation of different power converter topologies. The proposed PEBB consists of two diodes and two transistors and it can be used to implement the most relevant power converter topologies, due to its modularity. The addition of the two diodes is an exclusive feature of the new PEBB, which permits t...

This paper presents an implementation of open loop and closed loop control of Quadratic boost converter using PID controller.  Quadratic boost converter consists of boost converter and fly back converter driven by a single switch. Quadratic boost converter QBC is designed especially for regulating the DC interface between various micro sources and dc-ac inverter to electricity grid. Quadratic b...

The Designing of a single-inductor dual output (SIDO) fly-back power factor correction (PFC) converter is proposed, in which the multiplexing of a single-inductor is implemented with fly back converter through which each output can be regulated independently. The converter will be operating under in critical conduction mode (CRM).The efficiency along with power factor, total harmonic distortion...

This paper reports the development of a low-power switchedcurrent algorithmic A/D converter based on a new algorithm, providing the bit conversion in three-cycles. The converter uses modified SI type current copiers to reduce the overall area and power consumption. The analog portion of the converter occupies only 0.35mm area in 3μm CMOS technology. The simulation results show that the converte...

This paper presents a detailed small-signal and transient analysis of a full bridge PWM DC-DC converter designed for high voltage, high power applications using an average model. The derived model is implemented in a typical system and used to produce the small-signal and transient characteristics of the converter. Results obtained in the analysis of the high voltage and high power design examp...

In this paper, Fuzzy Logic controller is developed for ac/ac Matrix Converter. Furthermore, Total Harmonic Distortion is reduced significantly. Space Vector Algorithm is a method to improve power quality of the converter output. But its quality is limited to 86.7%.We are introduced a Cross coupled DQ axis controller to improve power quality. The Matrix Converter is an attractive topology for Hi...