The initial growth stage of the single-crystalline Sb and Co nanowires with preferential orientation was studied, which were synthesized in porous anodic alumina membranes by the pulsed electrodeposition technique. It was revealed that the initial growth of the nanowires is a three-dimensional nucleation process, and then gradually transforms to two-dimensional growth via progressive nucleation...

Related Articles Electrical conductivity in Li2O2 and its role in determining capacity limitations in non-aqueous Li-O2 batteries J. Chem. Phys. 135, 214704 (2011) Refinement of the theory for extracting cell dielectric properties from dielectrophoresis and electrorotation experiments Biomicrofluidics 5, 044109 (2011) Current-controlled negative differential resistance due to Joule heating in T...

Using a Si-based porous anodic alumina membrane as a mask, we demonstrate a way to pattern Si surface. After removing the SiO(2) nanoislands formed during anodization of the Al/Si interface, we obtain a Si nanotip array on the surface of a Si wafer. This array shows an excellent field emission property with a low turn-on field of 8.5 V µm(-1). The Fowler-Nordheim plot obtained is linearly depen...

The lattice parameter of Bi/BiSb superlattice nanowire (SLNW) has been measured using in situ high-temperature X-ray diffraction method. The single crystalline Bi/BiSb SLNW arrays with different bilayer thicknesses have been fabricated within the porous anodic alumina membranes (AAMs) by a charge-controlled pulse electrodeposition. Different temperature dependences of the lattice parameter and ...

Titanium oxide nanotubes were fabricated by anodic oxidation of a pure titanium sheet in an aqueous solution containing 0.5 to 3.5 wt% hydrofluoric acid. These tubes are well aligned and organized into high-density uniform arrays. While the tops of the tubes are open, the bottoms of the tubes are closed, forming a barrier layer structure similar to that of porous alumina. The average tube diame...

One-dimensional (1D) Bi-based nanostructures are promising thermoelectric materials and, furthermore, are very interesting systems for studying physical and chemical properties in the nanoscale, owing to their anisotropic character. The main challenges in this area are to control the diameter, orientation, and alloy composition with precision, and thereby to gain ready access to junction and su...

Two different ionic liquids have been tested in the electrochemical fabrication of anodic porous alumina in an aqueous solution of oxalic acid. It was found that during galvanostatic anodization of the aluminum at a current density of 200 mA/cm2, addition of 0.5% relative volume concentration of 1-butyl-3-methylimidazolium tetrafluoborate resulted in a three-fold increase of the growth rate, as...

Anodic porous alumina is a known material based on an old industry, yet with emerging applications in nanoscience and nanotechnology. This is promising, but the nanostructured alumina should be fabricated from inexpensive raw material. We fabricated porous alumina from commercial aluminum food plate in 0.4 M aqueous phosphoric acid, aiming to design an effective manufacturing protocol for the m...

The conical nanostructure improves the applications of alumina membranes and provides three dimensional nanometer scale systems to study the chemical and physical properties. In this study, the nano cone structure is produced in porous anodic alumina (PAA) by two-step anodizing. This conical nanostructure will improve the application of PAA membranes. This approach is novel generation of t...