aluminum foams are a novel branch of advanced materials with superior properties. sandwich structures with aluminum foam core are good energy absorbers. in this paper, mechanical properties and energy absorption of aluminum foam sandwich panels subjected to quasi-static perforation tests with conical-nosed indenter were investigated experimentally. for this purpose sandwich panels consisting of...

Polymeric foams have characteristics that make them attractive for different applications. However, some foaming methods rely on chemicals are not environmentally friendly. One of the possibilities to tackle environmental issue is utilize supercritical carbon dioxide ScCO2 since it a “green” solvent, thus facilitating sustainable method producing foams. nontoxic, chemically inert, and soluble i...

the brass tubes with foam cores of alsi7sic3, alsi7sic3fe1 and alsi7sic3fe3 were produced as the crush-boxes with circle and square cross-section. then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. the uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

A combination of gel-casting and polymeric foam infiltration methods is used in this study to prepare porous bodies of hydroxyapatite (HA), to provide a better control over the microstructures of samples. These scaffolds were prepared by impregnating a body of porous polyurethane foam with slurry containing HA powder, and using a percentage of solids between 40% and 50% w/v, and three different...

Most polymeric tribological components are inherently insulative, resulting in susceptibility to failure from frictional heating at the PV limit, which is typically reported as a product of the heat flux terms pressure (P) and sliding speed (V). This letter reports on the design of a tribological composite for increased thermal conductivity and PV limit. The control sample is an unfilled compos...

Foam and emulsion stability has long been believed to correlate with the surface shear viscosity of the surfactant used to stabilize them. Many subtleties arise in interpreting surface shear viscosity measurements, however, and correlations do not necessarily indicate causation. Using a sensitive technique designed to excite purely surface shear deformations, we make the most sensitive and prec...

The objective of this study is to investigate an appropriate process to fabricate the wood-polyurethane hybrid composites [wood-polyurethane foam (PUF)]. Rigid PUFs that contain up to 20% wood flours were successfully fabricated from polymeric 4,4-diphenylmethane diisocyanate, polyols, silicone surfactant, dibutin dilaurate/ dimethylethanolamine catalysts, and distilled water (chemical blowing ...

Tannin/furanic rigid foams were modi ed by either polymeric 4,4’ diphenylmethane diisocyanate (pMDI) or a one-component polyurethane still presenting reactive isocyanate groups (PUR). Several di erent sequences of mixing the isocyanate and polyurethane with the chemicals used to prepare tannin-based foams were tested. Scanning electron microscopy (SEM) showed that addition of either pMDI or PUR...

3D printing of polymeric foams by direct-ink-write is a recent technological breakthrough that enables the creation of versatile compressible solids with programmable microstructure, customizable shapes, and tunable mechanical response including negative elastic modulus. However, in many applications the success of these 3D printed materials as a viable replacement for traditional stochastic fo...

Foams prepared from shape memory polymers (SMPs) offer the potential for low density materials that can be triggered to deploy with a large volume change, unlike their solid counterparts that do so at near-constant volume. While examples of shape memory foams have been reported in the past, they have been limited to dual SMPs: those polymers featuring one switching transition between an arbitra...