Colloidal suspensions flowing through microchannels were studied for the effects of both the shear flow and the proximity of walls on the particles' self-diffusion. Use of hydrostatic pressure to pump micron-sized silica spheres dispersed in water-glycerol mixture through poly(dimethylsiloxane) channels with a cross section of 30×24μm(2), allowed variation in the local Peclet number (Pe) from 0...

Experimental investigation to study the heat transfer between a vertical round alumina-water nanofluid jet and a horizontal circular round surface is carried out. Different jet flow rates, jet nozzle diameters, various circular disk diameters and three nanoparticles concentrations (0, 6.6 and 10%, respectively) are used. The experimental results indicate that using nanofluid as a heat transfer ...

One of the central problems in the cell is how to transport molecules around the cell to desired locations. Since low Reynolds number conditions apply and diffusional times are large, without the aid of molecular motors to transport the fluid quickly cells could not survive, yet diffusion is still essential for the ultimate delivery of the goods. This paradox of low Reynolds numberlarge Peclet ...

Nanodroplets on a solid surface (i.e., surface nanodroplets) have practical implications for high-throughput chemical and biological analysis, lubrications, laboratory-on-chip devices, and near-field imaging techniques. Oil nanodroplets can be produced on a solid-liquid interface in a simple step of solvent exchange in which a good solvent of oil is displaced by a poor solvent. In this work, we...

The hydrodynamic parameters were determined for two different three-phase systems (fluidized-bed and trickle-bed) through the experimental evaluation of the dynamic residence time distribution in the gas or liquid phase. For different fluid phase flow rates the fluidized-bed system was operated with a tracer in the gas phase and in the trickle-bed with a tracer in the liquid phase. The analysis...

We present a systematic, experimentally validated method of designing electrokinetic injections for on-chip capillary electrophoresis applications. This method can be used to predict point-wise and charge-coupled device (CCD)-imaged electropherograms using estimates of species mobilities, diffusivities and initial sample plug parameters. A simple Taylor dispersion model is used to characterize ...

A mathematical model for the startup period of a fixed-bed reactor with first-order reaction kinetics, axial dispersion and film mass transfer resistance was formulated and solved analytically using Laplace transform. The solution can be used to correlate or predict the reactant concentration profiles in the effluent of the reactor. The effects of both the Peclet number and Biot number on the e...

This modeling effort seeks to improve the interlaminate bond strength of thermoplastic carbon composites produced by the in-situ automated tape placement (ATP) process. An existing high productivity model is extended to lower values of the Peclet number that correspond to the present operating conditions of the Langley ATP robot. (The Peclet number is the dimensionless ratio of inertial to diff...

The bio-thermal convection in a rotating layer of porous medium saturated with Newtonian fluid gyrotactic microorganisms is studied on the basis Darcy–Brinkman model. A linear analysis carried out using Galerkin method for rigid-rigid boundary conditions. In stationary regime, we obtained dispersion equation relation between thermal Rayleigh–Darcy number and bioconvection. influence Peclet numb...