In the present work, austenitic stainless steel 316L (SS316L) samples were implanted with Ni and Ni-Cr. A nickel-rich layer about 100 nm in thickness and a Ni-Cr enriched layer about 60 nm thick are formed on the surface of SS316L. The effects of ion implantation on the corrosion performance of SS316L are investigated in a 0.5 M H2SO4 with 2 ppm HF solution at 80°C by open circuit potential (OC...

This paper considers the application of surface-analytical techniques to characterize both thin (-2 nm) passive oxide films and thick (up to 1 pm) oxides formed on metals and alloys a t high temperature. Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), Mossbauer spectroscopy, X-ray absorption near edge spectroscopy (XANES), secondary ion mass spectrometry (SIMS) and el...

In this article, passivated Pb-Sn and Pb-Sb alloys with different compositions were studied by X-ray photoelectron spectroscopy (XPS). The passive films were found to have a double-layer structure. Both Sn and Sb were found to play an important role during the growth of passive film, which resulted in different compositions of passive filJ;l1s. The Pb oxides, Pb sulfate, SnlSb oxides, and Pb-Sn...

In certain geophysical contexts such as lava lakes and mantle convection, a cold, viscous boundary layer forms over a deep pool. The following model problem investigates the buoyant instability of the layer. Beneath a shear-free horizontal boundary, a thin layer (thickness d1) of very viscous fluid overlies a deep layer of less dense, much less viscous fluid; inertia and surface tension are neg...

Potentiodynamic, impedance measurements were carried out on 304 stainless steel in 0.5N, 1.0, 2.0 and 5.0 N H2SO4 solutions. X-ray photoelectron spectroscopic [XPS] studies carried out on 304 stainless steel in H2SO4 solutions revealed the existence of CrOOH, Cr2O3, -Fe2O3, FeOOH, Mn2O3, Mn3O4, MnS, Ni (OH)2, Ni2O3, NiO, sulphides. The passive film found to contain chromium oxide inner layer an...

The response of the passive photodosimeter with halide film characterized by a high optical density of about 0.550 ± 0.007 was analysed on dose ranges, taking into consideration the filters of the dosimetric badge, and finally compared with the thermoluminescent dosimeter (TLD). In this respect the dosimeters were exposed to a Cs 137 calibration radioactive source at different points within (0....

At this very moment an increasing interest in the field of high-temperature electronics is observed. This is a result of development in the area of wide-band semiconductors’ engineering but this also generates needs for passives with appropriate characteristics. This paper presents fabrication as well as electrical and stability properties of passive components (resistors, capacitors, inductors...

The atmospheric corrosion of Mg and MgAl alloys was investigated. Corrosion tests were performed in the laboratory under controlled environment. CP Mg, AM50 and AZ91 samples were exposed at 95% RH and 22°C in the presence and in the absence of 400 ppm CO2 for 24 h to 672 h. The passive film was characterized by means of XPS, FTIR, AES and XRD. The film consisted of MgO/Mg(OH)2 with carbonate on...