Recovery of copper from a synthetic solution with an initial copper concentration 1 g/l, pH 1 was investigated in a Pulsed Porous Percolated Electrode reactor (3PE). This reactor was constructed in the axial field configuration with 0.2 m diameter and 0.35 m height. Graphite particles were used as a voluminal cathode and a counter electrode made of titanium coated with ruthenium oxide was place...

Steam injection is the most suitable of Enhanced Oil Recovery (EOR) methods to recover high viscosity oil. This is due to the capabilities of steam to reduce oil viscosity and increase the sweep capability of oil from the injection well toward the production well. Oil operating conditions in production should be match well with the operating condition target at the bottom of the production well...

The pellet-type SnO2 sensor was synthesized by the solid state method and the effects of additives such as nano ZnO (1-12 mol %) and nano In2O3 (1-10 mol %) on the CO gas sensitivity of sensor were investigated. The optimum sintering temperature was chosen 800°C because of the porosity content of the samples. The phase analysis and microstructure of the samples were studied by x-ray diffraction...

conceptual design of a waste heat recovery cycle is carried out in attempt to enhance the thermal efficiency of a steam power plant. in the recovery system, super-critical an co2 is employed as the working fluid operating in a brayton cycle. low grade heat rejected by the flue gases through the stack is used as the primary heat source, while a secondary heat exchanger utilizes the hot gases lea...

Guarding against channel errors in wireless networks has been a challenging research problem, specially when transmitting time-constrained contents, like streaming video or image. Multiple Description Coding (MDC) has been designed for guarding against wireless channel errors. In MDC, a frame is broken into several equally important descriptions which can be sent over multiple paths to the dest...

Soil was treated with "C-ring-labeled fluometuron [N,N-dimethyl-N'[3-(trifluoromethyl)phenyll urea] (0.516 and 5.16 pmol gl), air-dried, and stored for 6 months at 5 "C. The 14C was then extracted from soil with methanol by conventional extraction (twice with MeOH/H20 8020 v/v; 2:l extract/soil v/w) and with CO2 using a supercritical fluid extractor. Supercritical fluid extraction (SFE) method ...

Conceptual design of a waste heat recovery cycle is carried out in attempt to enhance the thermal efficiency of a steam power plant. In the recovery system, super-critical an CO2 is employed as the working fluid operating in a Brayton cycle. Low grade heat rejected by the flue gases through the stack is used as the primary heat source, while a secondary heat exchanger utilizes th...

Development of methodology for the recovery of citric acid from the fermented broth involves standardization of the various parameters to achieve maximum performance in terms of recovery and optimum conditions. The present investigation was carried out to study the purification of citric acid from fermented broth by calcium carbonate precipitation and subsequent acid hydrolysis. The parameters ...

Sublethally stressed cells of 9 of 10 species of yeast were recovered at maximum levels when potato dextrose agar was adjusted to approximately pH 8. The optimum for candida utilis was at approximately pH 10. At pH 3.5, as commonly employed with media selective for yeasts and molds, recovery of heat-stressed organisms ranged from essentially the same as at optimum pH to levels of 1% or less of ...