BACKGROUND With the recent growth of interest in cell-based therapies and radiolabeled cell products, there is a need to develop more robust cell labeling and imaging methods for in vivo tracking of living cells. This study describes evaluation of a novel cell labeling approach with the positron emission tomography (PET) isotope (89)Zr (T 1/2 = 78.4 h). (89)Zr may allow PET imaging measurements...

The purpose of this study was to evaluate mechanical properties, surface characteristics and castability of Zr-14Nb dental castings. The mean 0.2% proof and ultimate tensile strengths of Zr-14Nb were approximately 68% and 76% those of Ti-6Al-7Nb, respectively, while they were comparable to Co-29Cr-6Mo. Elongation of Zr-14Nb was the highest of all alloys tested. The hardened reaction layer was f...

Techniques are described for growing single crystals ofthe transition metal dichalcogenide compounds Nb1 — ~Ta~Se2(0 ~ x ~ 0.20). Both iodine and selenium vapor transport have been used. A portion of the phase diagram has been determined, in order to produce the desired 2H polymorpoh for all compositions of interest. Measurement of the superconducting transition temperature is shown to be a use...

Reaction of d(0) Zr(NMe2)2[MeC(N(i)Pr)2]2 (1) with O2 at -30 °C gives three Zr containing products: a peroxo trimer {(μ-η(2):η(2)-O2)Zr[MeC(N(i)Pr)2]2}3 (2), an oxo dimer {(μ-O)Zr[MeC(N(i)Pr)2]2}2 (3), and an oxo polymer {(μ-O)Zr[MeC(N(i)Pr)2]2}n (4). is a rarely observed peroxo complex from the reaction of a d(0) complex with O2.

Purpose: To evaluate whether Zr can be used as a PET surrogate label for quantification of Yibritumomab tiuxetan (Y-Zevalin) biodistribution and dosimetry before myeloablative radioimmunotherapy. Methods: Zevalin was labelled with Zr by introducing Nsuccinyldesferal (N-sucDf) as a second chelate. For comparison of the in vitro stability of Zr-Zevalin and Y-Zevalin (as a substitute for Y), sampl...

Dense W and W-Zr composites reinforced with Sc2O3 particles were produced through powder metallurgy and subsequent spark plasma sintering (SPS) at 1700 °C and 58 MPa. Results showed that the W-1vol.%Zr/2vol.%Sc2O3 composites exhibited optimal performance with the best relative density of up to 98.93% and high Vickers microhardness of approximately 583 Hv. The thermal conductivity of W-Zr/Sc2O3 ...

Zr(IV) can form phosphate and Zr(IV) (-PO₃2--Zr4+-) complex owing to the high affinity between Zr(IV) with phosphate. Zr(IV) can induce the aggregation of gold nanoparticles (AuNPs), while adenosine triphosphate(ATP) can prevent Zr(IV)-induced aggregation of AuNPs. Herein, a visual and plasmon resonance absorption (PRA)sensor for ATP have been developed using AuNPs based on the high affinity be...

Addition of 1-hexene to methylalumoxane-activated catalyst systems based on rac-Me(2)Si(ind)(2)ZrMe(2) causes, concurrent with polyhexene formation and diminution of the otherwise prevalent cation [rac-Me(2)Si(ind)(2)Zr(mu-Me)(2)AlMe(2)](+), formation of a hitherto unobserved species [rac-Me(2)Si(ind)(2)Zr(mu-R)(mu-Me)AlMe(2)](+), where R is a Zr-bound polyhexyl chain. As hexene is increasingly...

Atom probe tomography was utilized to measure directly the chemical compositions of Al(3)(Zr(1)-(x)Ti(x)) precipitates with a metastable L1(2) structure formed in Al-0.1Zr-0.1Ti (at.%) alloys upon aging at 375 degrees C or 425 degrees C. The alloys exhibit an inhomogeneous distribution of Al(3)(Zr(1)-(x)Ti(x)) precipitates, as a result of a nonuniform dendritic distribution of solute atoms afte...