There is a novel range of steels under development, based on bainite forming at exceptionally low temperatures. The advantage of suppressing the transformation temperature is that incredibly fine platelets of bainitic ferrite are generated which are only 20–40 nm in thickness. This makes the steel strong and in combination with the austenite that is retained, gives a useful range of properties ...

The neutron irradiation response of a novel hot isostatically pressed SA508 Grade3 steel was studied, such to deduce any influence this unconventional RPV microstructure has on radiation response. In particular, the role elevated ferrite fraction investigated. Neutron conducted at 155 ± 10°C induce 0.1dpa damage, corresponded 2.53 0.63 GPa hardening for and 1.94 0.57 bainite as measured by nano...

with careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thinfilms of stable retained austenite have exhibited impressive combinations of strength and toughness in highsiliconbainitic steels. the silicon suppresses the precipitation of brittle cementite leading to an improvement intoughness. the essential principles governing the optimisation o...

There are precise observations which indicate the reluctance of excess carbon within bainite or martensite to partition into adjacent austenite in spite of prolonged heat treatment at temperatures where carbon is mobile. To explain this, we report the first calculations of the solubility of carbon in tetragonal ferrite that is in equilibrium with austenite. It is found that the solubility is dr...

The problems encountered with the interpretation of martensite and the various forms of bainite that are found in high strength steel weld metals have been addressed. Field emission gun scanning electron microscopy was found to overcome resolution difficulties often met with light optical microscopy and conventional scanning electron microscopy. The various microstructural constituents were cha...