Polypropylene and PA66 are widely used in our daily life, but they cannot be welded by laser transmission welding (LTW) because of polar differences and poor compatibility. In this paper, grafting modification technology is used to improve the welding performance between polypropylene and PA66. Firstly, the strong reactive and polar maleic-anhydride (MAH) is grafted to polypropylene and infrare...

This paper presents the results of an experimental study on the residual compressive and splitting tensile strength of autoclaved aerated concrete (AAC) containing perlite and polypropylene (PP) fiber subjected to high temperatures. Cylinder specimens were subjected to various temperature ranges of 100, 200, 400, 800, and 1,000°C. The mixtures were prepared with AAC cementitious materials conta...

A polypropylene hollow fiber membrane module is used for separating dissolved gases which contain dissolved oxygen from water. These dissolved gases can be used for underwater breathing. To be used for a human, the minimum amount of oxygen is essential. To increase separation of dissolved gases, much water and high surface area of hollow fibers are requested. For efficient separation system, pe...

We suggest a fiber micro-knot fabricated on a long-period fiber grating. The long-period fiber grating excites high-order modes into the micro-knot and transfers the output back to the Gaussian mode. We show theoretically and experimentally that these micro-knots have an improved Q-factor, higher stability, and have an increased evanescence wave coupling to the environment than single mode fibe...

in most cases, fiber reinforced self-compacting concrete (frscc) contains only one type of fiber. the use of two or more types of fibers in a suitable combination may potentially not only improve the overal properties of self-compacting concrete, but may also result in performance synergie. the combining of fibers, often called hybridization, is investigated in this paper for a cimentetious mat...

a type of novel hypercross-linked fiber adsorbent was obtained by sulfonation and cross-linking reaction of polypropylene fiber grafted styrene-divinylbenzene. the aim of the fiber sulfonation and cross-linking method was to prepare rigid three dimensional networks in the entire fiber and change the ion exchange capacity of fiber. the hypercross-linked fiber adsorbent possesses a principally di...

In this paper we investigate the transient shear rheology of a polypropylene containing long fibers (2.75 to 11 mm, L/D > 150) and short fibers (1 mm, L/D < 50). The objectives of this work are to determine the relationship between stress growth and relaxation behavior of fiber orientation and determine the feasibility of extending Doi’s theory for the rheology of rod-like molecules to fiber re...

Saccharomyces cerevisiae ATCC 4126 was grown within the macroporous matrix of asymmetric-walled polysulfone hollow-fiber membranes and on the exterior surfaces of isotropic-walled polypropylene hollow-fiber membranes. Nutrients were supplied and products were removed by single-pass perfusion of the fiber lumens. Growth of yeast cells within the macrovoids of the asymmetric-walled membranes atta...

In abiotic degradation the action of light radiation is one of the most important parameters, because polymers undergo degradation due to the action of light (natural or artificial). The aim of this study was to investigate the degradation rate for samples of polypropylene (PP) modified with an organic pro-degradant submitted to ageing in a natural environment and to accelerated ageing test. Th...