Executive Summary A series of experiments were performed in a small but full-scale CDS device to determine its ability to remove free oil and grease from polluted waters using sorbents. Nine experiments were performed using five different sorbents. One control experiment was performed without a sorbent. The sorbents were allowed to float on the surface of the separation chamber of the CDS devic...

The high frequency PWM voltage pulses from a two-level six-switch inverter produce common-mode in an electric machine’s windings, fraction of which appears on the machine shaft due to electrostatic (capacitive) coupling. When exceeds dielectric strength bearing lubricating grease, discharge machining (EDM) discharges occur within bearing, can lead premature failure. According pulsed theory, bre...

An environmental friendly palm-grease has already been formulated from modified RBDPO (Refined Bleach Deodorized Palm Oil) as base oil and lithium soap as thickener. Such palm-grease is dedicated for general application and or equipment working in areas where biodegradability is required such as in agriculture, forestry and coastal marine, recreation areas. The grease was manufactured via 4 ste...

The authors have previously proposed and tested a method for increasing the wear resistance of heavy-loaded friction pairs by saturating industrial lubricants with metallic nanopowder pair’s component that has lower hardness. To confirm effectiveness this concept, paper presents results experimental investigations into tribological characteristics two medium carbon steels (rail steel K74 struct...

Organic compounds in atmospheric particulate matterabove Maribor were analysed in 120 samples of PM10 sampled according to the EN 12341:2014 reference method. Organic compounds compositions were investigated together with the primary and secondary sources of air pollution. Silylation as derivatisation method was used for the GC/MS determination of volatile and semi-volatile polar organic compou...

The paper proposes a novel nano bearing formed by the physical adsorption of the confined fluid to the solid wall. The bearing is formed between two parallel smooth solid plane walls sliding against one another, where conventional hydrodynamic lubrication theory predicted no lubricating effect. In this bearing, the stationary solid wall is divided into two subzones which respectively have diffe...

Metal abrasive particle content in lubricating oil is an important index to judge the degree of deterioration of lubricating oil. Established a spiral electrode capacitance sensor by the finite element software ANSYS, the simulation result shows that the sensor is sensitive to the content of metal abrasive particle in lubricating oil, not affect by the metal abrasive particle itself. According ...

This paper is the second in a series that examines grease lubrication mechanisms and failure in rolling element bearings. The aim of the work was to understand the grease condition changes during use and the relationship to lubrication performance and failure. R0F bearing tests were carried out with two lithium hydroxystearate greases and the effects of the temperature, the speed, and the addit...

The grease gun injury is an uncommon injury to the orbit. However, high-pressure injection of grease, oil, or paint is frequently reported in injuries of the hand and usually affects the fingers or palm, which require complicated surgical and medical care. Two cases of grease gun injury to the orbit are reported: one, a catastrophic injury, and the other resulting in satisfactory recovery after...