The microstructure characterization of tempered nanocrystalline bainitic steel is investigated in the present study. It is found that two types of plastic relaxation, dislocation debris and nanotwin, occurs in the displacive transformation due to relatively low transformation temperature and high carbon content. Because most carbon atoms trap in the dislocation, high dislocation density can be ...

eaf plants normally consume coal and coke as reactants, alloying elements, or fuel. the price of these materials varies from € 0.20-0.35/kg. this is while nearly 10 million pieces of tires are annually discarded in iran. the present study shows that scrap tires can be used as a substitute for coal and coke in eaf plants. thirteen grades of steel including low, medium, and high carbon steels as ...

The biodegradable inhibitors, which could effectively reduce the rate of corrosion of carbon steel, were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The mixed-type inhibitors extracted from Eriobotrya japonica Thunb. leaf exhibited excellent inhibition performance, and the inhibition efficiency for carbon steel reached 90.0% at 298 K in hydroch...

Carbonitriding of four types of steels, namely, low carbon steel (LCS), medium carbon steel (MCS), low alloy steel (LAS) and high alloy steel (HAS) was achieved using cyanide salt bath heat treatment process. The steels, after preheating, were heated in a diesel fired salt bath heat treatment furnace and then quickly quenched in different media including air, oil and brine. The heat treatment p...

The study reports the mechanical property and microstructure of cold rolled low carbon steel and its work-hardening behavior in the deformation process. The tensile test in room temperature of low carbon steel was implemented for the different cold rolling deformation, the stress-strain curve was draught according to the relationship between strength and deformation and fitted for the polynomia...

The present research was designed to evaluate an ultrasonic technique for measuring the drawability of low carbon steel sheets nondestructively. This technique, which uses electro magnetic acoustic transducers (EMAT's) is embodied in a fully automatic ultrasonic device called Ultra-Form, which was developed at Iowa State University (by the Center For Nondestructive Evaluation) in 1990. EMAT tra...