The jet mixing of a co-flow jet (CFJ) airfoil is investigated to understand the mechanism of lift enhancement, drag reduction, and stall margin increase. Digital Particle Image Velocimetry, flow visualization and aerodynamic forces measurements are used to reveal the insight of the CFJ airfoil mixing process. At low AoA and low momentum coefficient, the mixing between the wall jet and mainflow ...

Flow separation control over a three-dimensional contour bump using jet in a Mach 1.9 supersonic freestream has been experimentally investigated using a transonic/supersonic wind tunnel. Jet total pressure in the range of 0–4 bar was blowing at the valley of the contour bump. Schlieren photography, surface oil flow visualisation and particle image velocimetry measurements were employed for flow...

A variety of different types of actuators have been previously investigated as flow control devices. Potential applications include the control of boundary layer separation in external flows, as well as jet engine inlet and diffuser flow control. The operating principles for such devices are typically based on either mechanical deflection of control surfaces (which include MEMS flap devices), m...

Flip buckets are terminal spillway elements, generating free jets for energy dissipation. Deflectors are an alternative to flip buckets with constructional ease yet of similar hydraulic features. A first experimental study published at the 33 IAHR Congress, Vancouver, investigated deflectorgenerated jets in terms of their air concentration characteristics. For jet impact onto a movable bed, the...

A jet flow from a triangular-inlet orifice can be made to oscillate or “precess” by partially confining it with a short cylindrical chamber. However, for a narrow range of chamber lengths, the jet is deflected but does not oscillate. Earlier flow-visualisation experiments with this stationary-deflected triangular jet (SDTJ) have revealed a complex flow pattern inside the chamber. The aim of thi...

A synthetic jet is one of flow control devices that can topologically disturb surrounding flow field by adding periodic injection and suction of surrounding fluid using an oscillating membrane through an orifice. This device can be applied to the downsized fluid machinery without a net mass injection of fluid for the simplified structure. In this study, the phase-averaged three-dimensional flow...

recently, particular attention has been paid to the stepped spillways due to the increasing effect of energy dissipation and the reduction of cavitations risks with the development of roller compacted concrete (rcc) technique. flow regimes on the spillways divide into three groups, namely skimming, jet and transition flow. compared to the numerical methods, the majority of performed studies in ...

Downfall flows from different outlet hydraulic structures such as culverts and jetsthrowingtothe erodible downstream bed cause scour hole and changes in the downstream bed topography. Therefore,by performing some physical modeling tests on culvert jet flow under different angles, changes in the downstream bed topography under the effect of different parameters such as flow rate, depth of the ta...