This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...

Present study dealt the removal of Cr(VI) in a tannery industry wastewater using rice husk silica powder as an adsorbent.The experimental investigations have been carried out by using rice husk silica powder for different adsorption dosage, different contact time and different pH against the initial Cr(VI) concentration of 292 mg/L. The maximum percentage removal of Cr(VI) in the tannery indust...

The effects of the functional groups and structures of two different resins, weak base/macroporous and strong base/gel type, Purolite A170 and Dowex 21K on the adsorption properties of Re(VII) ions were investigated experimentally and described by the isotherm, kinetic, and thermodynamic modeling. In this regard, four widely used adsorption isotherm models including Langmuir, Freundlich, Temkin...

in this work, removal of c. i. acid red 14 was investigated by pumice stone as a low cost adsorbent. various parameters such as initial dye solution, contact time and ph were studied. removal of dye were increased by increasing of contact time and initial dye solution and deceased by increasing of ph. three isotherm models were studied. linear and non-linear regression analyses were used for de...

We report an investigation of water adsorption in the hydrophobic metal-organic framework Al(OH)(1,4-naphthalenedicarboxylate) by means of molecular simulation. We show how simple molecular models allow us to reproduce the experimental isotherm, and how grand canonical Monte Carlo simulations can help elucidate the question of the thermodynamic nature of the adsorption transition, which turns o...

The adsorption of contaminants plays an important role in the process of their elimination from a polluted environment. This work describes the issue of loading environment with lead Pb(II) and the resulting negative impact it has on plants and living organisms. It also focuses on bentonite as a natural adsorbent and on the adsorption process of Pb(II) ions on the mixture of bentonite and botto...

The efficiency of activated parthenium hysterophorous as an adsorbent for removing Pesticide mixture from water has been studied. Batch mode adsorption experiments have been conducted by varying pH, concentration, adsorbent dose and contact time. Pesticide removal was pH-dependent and found to be maximum at pH 2.0. The maximum removal of pesticides was achieved within 100 min after the start of...

Three isotherm models were used to describe adsorption equilibrium of a toxic chemical compound, phenol, onto a non porous adsorbent (Mediterranean Posidonia oceanica fibres) and a porous adsorbent, activated carbon prepared from Caribbean Vetiveria zizanoides roots. The adsorption characteristic parameters obtained were calculated using classical adsorption isotherm, i.e. the Langmuir (LI), Fr...

The effective removal of heavy metals from aqueous wastes is among the most important issues for many industrialized countries. Removal of arsenic (As) from aqueous solutions was studied using Rhazia stricta biomass. The batch experiments are carried out to investigate the effect of the significant process parameters such as pH, contact time, solute concentration and adsorbent dose. The optimum...

Magnetic zeolite/iron oxide nanocomposite was prepared by mixing zeolite synthesized from coal fly ashes with magnetite nanoparticles in suspension and was used for the removal of Reactive Orange 16 (RO16) and Indigo Carmine (IC) from aqueous solutions. The effect of various experimental parameters such as contact time, pH, adsorbent dose and temperature were investigated. The experimental data...