This study presents a new mechanical tube cladding process named punch plastic deformation pipe cladding (PPDPC) based on local deformation by pressing a punch into the inner layer of the bimetal tube. To investigate the capability of the process, stainless steel tube (as the inner layer) is bonded to a carbon steel pipe (as the outer layer) to fabricate a bimetal pipe. Shear punch tests were u...

A vacuum ultraviolet absorption spectroscopy system for a wide measurement range of atomic number densities is developed. Dual-tube inductively coupled plasma was used as a light source. The probe beam profile was optimized for the target number density range by changing the mass flow rate of the inner and outer tubes. This system was verified using cold xenon gas. As a result, the measurement ...

OBJECTIVE To compare performance of flow-adapted compensation of endotracheal tube resistance (automatic tube compensation, ATC) between the original ATC system and ATC systems incorporated in commercially available ventilators. DESIGN Bench study. SETTING University research laboratory. SUBJECTS The original ATC system, Dräger Evita 2 prototype, Dräger Evita 4, Puritan-Bennett 840. INT...

the forced convection heat transfer of turbulent al2o3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. the governingequations have been solved using finite volume method (fvm) coupled with simple algorithm. it isassumed the heat flux is constant on the grooved walls. the single-phase approach is applied for the...

It is reported in this article that Si nanowires can be employed as a positive template for the controllable electrochemical deposition of noble metal tube. The deposited tube exhibits good crystallinity. Scanning electron microscope and transmission electron microscope characterizations are conducted to reveal the growth process of metal tube, showing that the metal tube grows quasi-radially o...

The effects of erythrocyte aggregation on O(2) release were examined using O(2)-permeable fluorinated ethylenepropylene copolymer tubes (inner diameter, 25 microm; outer diameter, 100 microm). Measurements were performed using an apparatus built on an inverted microscope that contained a scanning-grating spectrophotometer with a photon count detector connected to two photomultipliers and an ima...

The effect of the design on heat transfer is numerically investigated by using wavy inner tube in a double-pipe exchanger. A was used to give turbulent fluid along double In numerical study, ANSYS 12.0 Fluent code program used, and basic protection equations were solved for steady-state, 3-D flow conditions. study examined at Reynolds numbers ranging from 2700-5300. obtained results compared wi...

The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...

We propose a new drive mechanism for carbon nanotube (CNT) motors, based upon the torque generated by a flux of electrons passing through a chiral nanotube. The structure of interest comprises a double-walled CNT formed from, for example, an achiral outer tube encompassing a chiral inner tube. Through a detailed analysis of electrons passing through such a "windmill," we find that the current, ...

Helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. In this kind of heat exchangers, flowand heat transfer are complicated. This paper reports a numerical investigation of theinfluence of different parameters such as coil...