Electric arc furnace dust (EAFD) is generated in considerable amounts by the electric arc steelmaking process. During melting in an electric arc furnace, certain elements volatilize, and form fine dusts after cooling. The EAFD is collected in a baghouse and amounts to approximately 1–2 wt% of the steel produced.1) In China, about 800 million tons of steel was produced in 2015 with more than 9 w...

The melting temperatures have been determined for a wide range of substances as a function of pressure. In the present work, Teflon (polytetrafluoroethylene) was investigated up to 30 kb and the decomposition temperatures, and the melting temperatures of silver chloride and iodine were determined up to 30 kb and 20 kb, respectively. General Technique. -The pressure was generated with a piston-c...

Abstract—This study presents a simple inverse heat transfer procedure for predicting the wall erosion and the time-varying thickness of the protective bank that covers the inside surface of the refractory brick wall of a melting furnace. The direct problem is solved by using the Finite-Volume model. The melting/solidification process is modeled using the enthalpy method. The inverse procedure r...

This paper describes an approach to furnace charge calculation for melting processes, achieve a specified target melt in crucible or induction furnaces with minimum material cost. There has been challenge the problem regarding loss, contaminations, and unwanted physiochemical reactions during process. Those put high degree of complexity, non-linearity, uncertainty on calculations. The current s...

In this research work, the possibility of semi industrial production of Al-TiB2 and Al-ZrB2 composites, using reactive slag in a flame furnace have been investigated. For this purpose, commercial pure aluminum and powder mixture of TiO2 (ZrO2) , KBF4 and Na3AlF6 were used. The results showed that using a proper ratio of slag forming materials as well as proper amounts of the above-mentioned com...

In this research work, the possibility of semi industrial production of Al-TiB2 and Al-ZrB2 composites, using reactive slag in a flame furnace have been investigated. For this purpose, commercial pure aluminum and powder mixture of TiO2 (ZrO2) , KBF4 and Na3AlF6 were used. The results showed that using a proper ratio of slag forming materials as well as proper amounts of the above-mentioned com...