Landing is a common movement task used in investigating impact attenuation and mechanisms of impact related lower extremities injury [1-5]. In the literature, there is limited biomechanical information regarding the relationship between eccentric strength of lower extremities and impact related biomechanics in landing. It is still unclear what roles of lower extremity eccentric strength plays i...

The aim of this study is to clarify the effect of different concentrations of titanium dioxide nanoparticles (Nps) on the properties of two types of heat polymerized acrylic resin. The tested parameters were flexural strength, impact strength, and microhardness. The two types of acrylic resin used in this study were conventional unmodified (Implacryl, Vertex) and high impact heat polymerized ac...

The main purpose of this paper is to assess the impact of the geometry and size of the aggregate, as well as the drying temperature on the compressive strength of the ordinary concrete. To this end, two aggregates with sharp and round corners were prepared in three different aggregate sizes. After preparing concrete samples, the drying operations were carried out in the vicinity of room tempera...

In this work, ternary polymer blends based on polypropylene (PP)/ polyethylene terephthalate (PET) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS-g-MAH) at various compositions were prepared by co-rotating twin screw extruder. The effects of PET, SEBS and SEBS-g-MAH compatibilizer on morphology of the blends were ex...

Results of experimental investigation carried out to study the effects of addition of natural san fibres on the fracture toughness and impact strength of high-volume fly ash concrete are presented in this paper. San fibres belong to the category of ‘Natural Bast Fibres’, also known as ‘Sunn Hemp’. Its scientific (botanical) name is Crotalaria Juncea. It is mostly grown in the Indian Sub-Contine...

The work presented in this paper focuses on the behavior of anisotropically conductive film (ACF) joint under the dynamic loading of flip chip on glass (COG) and flip chip on flexible (COF) substrate packages. Impact tests were performed to investigate the key factors that affect the adhesion strength. Scanning electron microscopy (SEM) was used to evaluate the fractography characteristics of t...

in this study , the physical and mechanical properties of polypropylene composites reinforced with bagasse alkaline-sulfite-anthraquinone, soda-anthraqouinone, monoethanolamine-anthraquinone chemical pulps and mechanical pulp (cmp) known as pulp-plastic compostes (ppc) were investigated and the results were compared among ppcs and with polypropylene composites reinforced with bagasse flour know...

AIMS To evaluate and compare the flexural strength and impact strength of conventional and microwave cured denture base resins before and after repeated sterilization using microwave energy to consider microwave curing as an alternative to the conventional method of sterilization. MATERIALS AND METHODS The conventional heat cure acrylic resin (DPI heat cure material) Group A and microwave-pol...

In this paper, an ultra low carbon High Strength Low Alloy Grade Steel was subjected to a two-step forging process and this was followed by different post cooling methods. The highest strength was obtained at a faster cooling rate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides and carbonitrides. At a slow cooling rate, the strength ...