Denture bases may undergo color change over time induced by pigment accumulation within their body; however there is a lack of information regarding the role of yerba mate tea in this process. This work evaluated the effect of five common beverages, including yerba mate tea, on color changes of acrylic denture base resins processed in three different ways. Three different processing techniques ...

AIMS To evaluate the effect of chemical disinfectant on the transverse strength of heat-polymerized acrylic resins subjected to mechanical and chemical polishing. MATERIALS AND METHODS A total of 256 rectangular specimens (65 * 10 * 3 mm) 128 per resin (Lucitone-199 and Acralyn-H) were fabricated. One side of each specimen was not polished and the other was either mechanically (n = 96) or che...

Statement of problems: Two potential problems commonly identified with a denture base incorporating a resilient liner are a failure of the bond between the acrylic resin and resilient liner material and colonization of Candida albicans over time. Aims: This in vitro experimental study evaluated the shear and compressive bond strength as well as colonization of Candida albicans of commonly avail...

This study evaluated the color stability, surface roughness and flexural strength of a microwave-polymerized acrylic resin after immersion in sodium hypochlorite (NaOCl), simulating 20 min of disinfection daily during 180 days. Forty disk-shaped (15 x 4 mm) and 40 rectangular (65 x 10 x 3 mm) specimens were prepared with a microwave-polymerized acrylic resin (Onda-Cryl). Specimens were immersed...

This study evaluated the influence of methacrylic acid (MA) incorporation on hardness, roughness, and flexural strength of a denture base acrylic resin. Thirty-two circular and 40 rectangular specimens were divided into four groups, according to the concentration of MA substituted into the monomer component of a heat-polymerized acrylic resin, as follows: 0% (Control), 10%, 20% and 50% (v/v). T...

This study evaluated color stability, surface roughness and flexural strength of acrylic resin specimens after immersion in alkaline peroxide and alkaline hypochlorite, simulating a period of one and a half year of use of overnight immersion. Sixty disc-shaped (16x4 mm) and 80 rectangular specimens (65x10x3.3 mm) were prepared from heat-polymerized acrylic resin (Lucitone 550) and distributed i...

The purpose of the present study was to evaluate the effects of different repair resins and surface treatments on the repair strength of a polyamide denture base material. Polyamide resin specimens were prepared and divided into nine groups according to the surface treatments and repair materials. The flexural strengths were measured with a 3-point bending test. Data were analyzed with a 2-way ...

PURPOSE Fractures in acrylic resin dentures occur quite often in the practice of prosthodontics. A durable repairing system for denture base fracture is desired to avoid recurrent fracture. The purpose of this study was to evaluate the fracture force, deflection, and toughness of a heat-polymerized denture base resin repaired with autopolymerized resin alone (C), visible light-polymerizing resi...

OBJECTIVES Residual methyl methacrylate (MMA) may leach from the acrylic resin denture bases and have adverse effects on the oral mucosa. This in vitro study evaluated and correlated the effect of the leaching residual MMA concentrations ([MMA]r) on in vitro cytotoxicity of L-929 fibroblasts. MATERIAL AND METHODS A total of 144 heat-polymerized acrylic resin specimens were fabricated using 4 ...

OBJECTIVES The purpose of this study was to evaluate the antimicrobial activity of an acrylic resin combined with an antimicrobial polymer poly (2-tert-butylaminoethyl) methacrylate (PTBAEMA) to inhibit Staphylococcus aureus, Streptococcus mutans and Candida albicans biofilm formation. MATERIAL AND METHODS Discs of a heat-polymerized acrylic resin were produced and divided according to PTBAEM...