A low cost and low dielectric loss zirconium silicate (ZrSiO4) reinforced HDPE (high-density polyethylene) composite has been developed for antenna applications. The 0-3 type composite is prepared by dispersing ZrSiO4 fillers for various volume fractions (0.1 to 0.5) in the HDPE matrix by the melt mixing process. The composite shows good microwave dielectric properties with a relative permittiv...

To modify water absorption properties of bamboo fiber (BF) and high density polyethylene (HDPE) composites, heat treatment of BFs was performed prior to compounding them with HDPE to form the composites. The moisture sorption property of the composites was measured and their diffusion coefficients (Dm) were evaluated using a one-dimensional diffusion model. Moisture diffusion coefficient values...

A melt flow indexer (MFI) was used to investigate high-temperature transitions in melts of high-density polyethylene (HDPE). The MFI data were obtained in the range 190–230°C. These transitions were found in the MFI at about 210 and 225°C and reproduced in a Haake melt blender. Polystyrene was used in the blender experiment to demonstrate typical amorphous behavior. For HDPE melts, the MFI–temp...

High-density polyethylene (HDPE) piping has been used in place of steel alloys in the petrochemical, power, and mining industries due to its exceptional resistance to corrosion and erosion. Recently, HDPE has also been used for nuclear safety-related cooling water applications. The application of nuclear quality assurance requirements creates reasonable assurance that the production fusion join...

The Balgrist hip socket, initially made entirely of HDPE (high molecular weight polyethylene), now made of outer titanium alloy shell that faces the bone of the acetabulum has been in clinical use for 10 years. The purpose of this presentation is to illustrate the biomechanical principles that have governed this unique design and to present the clinical results that we have obtained until the e...

Microfibrillar composites (MFCs) from recycled high density polyethylene (R-HDPE)/recycled poly (ethylene terephthalate) (R-PET) (75/25 w/w) were made through reactive extrusion and post-extrusion strand stretching. The resultant MFCs could be processed at HDPE processing temperature. The compatibility between microfibers and R-HDPE matrix was improved through compatibilizers. Of the three comp...

In recent years, the development and use of polymeric nanocomposites in creating advanced materials has expanded exponentially. A substantial amount of research has been done in order to design polymeric nanocomposites in a safe and efficient manner. In the present study, the impact of processing parameters, such as, barrel temperature, and residence time on the mechanical and thermal propertie...

Thermal behavior of plastic materials can be improved by knowing thermal degradation kinetics for the optimal design and operation of pyrolysis process. In the present study, thermogravimetric analysis has been used for the non-isothermal kinetic study of waste high-density polyethylene pyrolysis under nitrogen atmosphere at different heating rates 10, 20 and 40 °C/min. The kinetic parameters, ...

The effect of substrate interferences from high-density polyethylene (HDPE) on the ability to associate an ignitable liquid residue with the corresponding liquid standard, using statistical procedures, is demonstrated. Gasoline, kerosene, and lighter fluid, at three different evaporation levels, were spiked onto HDPE and subsequently burned to generate simulated ignitable liquid residues (ILRs)...

The inert and oxidative flash pyrolysis of High Density Poly-Ethylene (HDPE) is studied 6 up to 20 000 K.s, under pressure up to 3.0 MPa and at temperature ranging from 1000 K to 7 1500 K. These conditions are considered to represent those waited onboard a hybrid rocket 8 engine using HDPE as solid fuel. Recycling applications may also find some interest. The 9 pyrolysis products are quantified...