To investigate the gradual failure of high-density polyethylene (HDPE) geomembrane as a result of long-term corrosion, four dynamic corrosion tests were conducted at different temperatures and durations. By combining tension and puncture tests, we systematically studied the variation law of tension and puncture properties of the HDPE geomembrane under different corrosion conditions. Results sho...

Eight retrieved metal-on-metal total hip replacements displayed corrosion damage along the cobalt-chromium alloy liner taper junction with the Ti alloy acetabular shell. Scanning electron microscopy indicated the primary mechanism of corrosion to be grain boundary and associated crevice corrosion, which was likely accelerated through mechanical micromotion and galvanic corrosion resulting from ...

In this paper, the corrosion residual strength of the AZ91D magnesium alloy in the presence of sulfate-reducing bacteria is studied. In the experiments, the chemical composition of corrosion film was analyzed by a scanning electron microscope with energy dispersive X-ray spectroscopy. In addition, a series of instruments, such as scanning electronic microscope, pH-meter and an AG-10TA materials...

Corrosion is a significant maintenance problem, especially for aging aircrafts, with the Air Force recently estimating corrosion maintenance costs exceeding $800M per year. Nondestructive evaluation (NDE) techniques can be used to detect corrosion under paint and hidden within layered structures. However, it is difficult to capture a comprehensive picture of the corrosion environment using any ...

Corrosion of reinforcement is one of the main durability problems of concrete structures. The corrosion induces several structural damages which affect the serviceability and the safety of concrete structures. The structural risk is promoting the possibility of embeded sensors which could give alerts in order to repair the structure before reaching dangerous levels of damage. There are an incre...

Corrosion control can be initiated in many ways and may involve either a reduction in corrosion rate or corrosion prevention. Electrolytic corrosion can be prevented by removing a corrosion parameter such as oxygen, moisture or the soluble ions that form the electrolyte. Removing moisture will prevent the formation of an electrolyte solution and is normally cheaper and technically less challeng...

Because of the existence of corrosion media such as chlorine, serious corrosion attacks ships, offshore and marine structure. Scholars worldwide have been long committed to the research of marine corrosion and development of anti-corrosion agents, and have achieved remarkable results. But so far, the conventional ocean coating inevitably makes microholes or microcracks between the additive and ...

A review is provided about the current research on magnesium/magnesium alloys corrosion in the industry. Except for reviewing the kinds of corrosion on galvanic corrosion, stress corrosion, and corrosion fatigue, its corresponding mechanisms are also explained, such as the influence of metallurgical factors, and environmental factors. Furthermore, the protection of magnesium/magnesium alloys co...

The increase in CO2 concentrations and global warming will increase the carbonation depth of concrete. Furthermore, temperature rise will increase the rate of corrosion of steel rebar after carbonation. On the other hand, compared with normal concrete, high volume fly ash (HVFA) concrete is more vulnerable to carbonation-induced corrosion. Carbonation durability design with climate change is cr...

Complex numerical models and simulations from the microscale to the macroscale have been developed for the corrosion of aluminium (Al) alloys typically used for aircraft construction, such as AA2024. The main motivation for developing the corrosion models and simulations is to make significant technical advancements in the fields of aircraft design (using current and new materials), surface pro...