Impinging jets are known as a method of achieving high convective heat transfer coefficients. One potential application of impinging jet heat transfer is the air jet cooling of a grinding process. A grinding process generates heat that must be dissipated to avoid thermal damage. To date, this has been achieved using flood cooling with a traditional coolant such as an oil and water mixture; howe...

This study investigates the grinding of sintered silicon nitride using a SiC wheel with a fine abrasive grit size and dense vitreous bond. The difference of hardness between the green SiC abrasive and sintered Si3N4 workpiece (25.5 vs. 13.7 GPa) is small. Large grinding forces, particularly the specific tangential grinding forces, are observed in SiC grinding of Si3N4. The measured specific gri...

Introduction When the grinding wheel specifications are properly chosen, a SiC grinding wheel performs remarkably well for grinding partially stabilized MgO-ZrO2 ceramics (MgO-PSZ). Rather surprisingly, the highest Gratios are obtained at higher grinding rates for the SiC wheel. This, and the fact that SiC grinding wheels can be readily shaped for use in precision cylindrical form grinding, has...

This research is to investigate the dynamic characteristics of the grinding process. A kind of robust grinding wheel reciprocating arrangement is schemed out, which realizes the precise point-grinding machining. The grinding wheel reciprocating movement is driven by a linear motor to replace the traditional crank or hydraulic pressure drive device. Based on the time series method, the modal exp...

Switchgrass was pelleted to evaluate the effect of densification on acidic and alkaline pretreatment efficacy. Bulk density and durability of pellets were 724 kg/m(3) and 95%, respectively. Ground switchgrass (D(90) = 21.7 mm) was further ground to a fine power (D(90) = 0.5mm) in the pellet mill prior to densification. This grinding increased enzymatic hydrolyzate glucose yields of non-pretreat...

Mechanical properties of copper (Cu) film under grinding process were accomplished by molecular dynamics simulation. A numerical calculation was carried out to understand the distributions of atomic and slip vector inside the Cu films. In this study, the roller rotation velocity, temperature, and roller rotation direction change are investigated to clarify their effect on the deformation mechan...

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethen...

This article studies the effect of grinding along crystallographic directions on the surface finish of single-crystal silicon. It also discusses new and=or improved processes for precision machining brittle materials, including silicon. Silicon samples were cut from (100) silicon wafers. These samples were then subjected to grinding along different crystallographic directions under the same exp...

Grinding is a key physical element in America’s Cup sailing. This study aimed to describe kinematics and muscle activation patterns in relation to torque applied in forward and backward grinding. Ten male America’s Cup sailors (33.6 ̆ 5.7 years, 97.9 ̆ 13.4 kg, 186.6 ̆ 7.4 cm) completed forward and backward grinding on a customised grinding ergometer. In forward grinding peak torque (77 Nm) occ...

AIM The aim of the present study was to assess the change in physical properties (surface roughness, surface hardness and phase transformation) after surface grinding of zirconia by using three commercially available abrasives. MATERIALS AND METHODS Thirty sintered zirconia specimens were prepared and divided into three groups namely Group M (grinded using Mani Dia diamond bur standard grit),...