Composite materials can be defined as a combination of two or more materials that results in better properties than those of the individual components used alone. These materials have high strength and stiffness combined with low density compared to the conventional metals. Polymers are structurally more complex than metals. Polymer – matrix composites are viscoelastic materials and their mecha...

For bone regeneration and repair, combinations of different materials are often needed. Biodegradable polymers are often combined with osteoconductive materials, such as bioactive glass (BaG), which can also improve the mechanical properties of the composite. The aim of this work was to develop and characterize BaG fiber reinforced starch-poly-epsilon-caprolactone (SPCL) composite. Sheets of SP...

Polyamide 6 (PA6) and short glass fiber (SGF) reinforced PA6 composites toughened with glycidylisobutyl oligomeric silsesquioxane (G-POSS) and 1.10-carbonyl-bis-caprolactam (CBC) were prepared by meltextrusion compounding process and then compounds were formed to 2 mm thick double edge notched tension samples (DENT) by injection moulding process. Fracture properties of composites were analyzed ...

1. Abstract Natural fibers are being increasingly used to substitute artificial glass and carbon fibers in polymer composites. It is important to know how the mechanical properties of these natural fiber composites compare with those of the traditional glass and carbon fiber composites. Glass and carbon fiber composites are currently being used in many applications that may not require such hig...

A research has been conducted in the present study to investigate the effect of hole configuration on tensile strength of lontar fiber-reinforced composites. The lontar fiber-reinforced composites used in this study were produced by hand lay-up process. The lontar fiber-reinforced composites consist of short random fiber of 5 cm that contains 32% of nominal fiber volume as the reinforcement and...

Glass fiber reinforced plastic (GFRP) composite materials are a feasible alternative to engineering materials and are being extensively used in variety of engineering applications. Accordingly, the need for accurate machining of composites has increased enormously. During machining, the obtained surface roughness is an important aspect. The present investigation deals with the study and develop...

Damage constitutive models based on micromechanical formulation and a combination of micromechanical and macromechanical damage criterions are presented to predict progressive damage in aligned and random fiber-reinforced composites. Progressive interfacial fiber debonding models are considered in accordance with a statistical function to describe the varying probability of fiber debonding. Bas...

Natural fibers are emerging as low cost, lightweight and apparently environmentally superior alternatives to glass fibers in composites. We review select comparative life cycle assessment studies of natural fiber and glass fiber composites, and identify key drivers of their relative environmental performance. Natural fiber composites are likely to be environmentally superior to glass fiber comp...

Since the early 1930s, the process of melting glass and subsequently forming fibers, in particular discontinuous fiber glass or continuous glass filaments, evolved into commercial-scale manufacturing. Most commonly, a direct melt process is applied. Thereby, the several raw materials were mixed, fed into a furnace, melted and forwarded to the fiber-forming units. Here, the filaments are formed ...

The application of nanoparticles in order to enhance the composites properties has been recently attracted many researchers' attentions. To increase the mechanical and physical properties of the composites, the nanoparticles have no significant effect on the weight and nanostructure of composites. One of the well-known nanoparticles is the Nanoclay (NC) that have been widely used in industries ...