The effects of different parameters on the hydrodynamics of trickle bed reactors were discussed for Newtonian and non-Newtonian foaming systems. The varying parameters are varying liquid velocities, gas flow velocities and surface tension. The range for gas velocity is particularly large, thanks to the use of dense gas to simulate very high pressure conditions. This data bank has been used to c...

The subsea jumper has become an essential part of production systems as a gas–liquid mixing pipeline connecting the end manifold (PLEM) to Christmas tree. During oil and gas transportation, common flow pattern, alternating characteristics slug easily cause vibration, resulting in instability or fatigue damage. present study investigates experimentally numerically M-shaped its induced vibrations...

A method based on Electrical Capacitance Tomography (ECT) and an improved Least Squares Support Vector Machine (LS-SVM) is proposed for void fraction measurement of oil-gas two-phase flow. In the modeling stage, to solve the two problems in LS-SVM, pruning skills are employed to make LS-SVM sparse and robust; then the Real-Coded Genetic Algorithm is introduced to solve the difficult problem...

The lance is a critical component of the bottom-blowing pool melting process, and its placement has an important impact on pool?s gas-liquid two-phase flow. In this study, mathematical model process established, flow pattern, trajectory, wake vortex, velocity bubbles under four spacings are simulated. Results show that there three basic bubble patterns appear in field: coalesce before leaving n...

Carbon dioxide capture is a key issue in climate change mitigation. For decades the removal of carbon dioxide has been an essential step in many industrial processing operations such as the synthesis of ammonia, natural gas purification, and oil refining. In this study, a rotating packed bed has been designed for absorption of carbon dioxide from an air stream. The rotating packed bed is a comp...

This study aimed at linear stability analysis of the stratified two-phase liquid-gas flow in a horizontal pipe. First, equations governing the linear stability of flow in each phase and boundary conditions were obtained. The governing equations were eigenvalue Orr Sommerfeld equations which are difficult and stiff problems to solve. After obtaining the velocity profiles of the gas and liquid ph...

Subsea jumpers connecting the underwater wellhead and nearby manifold commonly undergo flow-induced vibration (FIV) due to spatially frequent alteration in flow direction, velocity, pressure phase volume fraction of oil–gas two-phase flow, potentially leading fatigue damage. This paper reports numerical results FIV a reversed U-shaped jumper excited by gas–liquid which evolves from initial slug...

Abstract Experimental investigations were performed on the hollow-cone spray of viscous liquids in high-pressure gas environment, aiming to obtain fundamental knowledge which was indispensable to survey the applicability of non-conventional new liquid fuels for the gas-turbine power-plant. Test liquid employed were water, diesel fuel, palm methyl ester (PME) and silicone-oil #10. The ambient ga...

Production of gases from gas-condensate reservoirs are known to bear certain challenges largely due to the formation of retrograde condensates that hinder gas flow. The drop out of this liquid creates flow regions that are characterized by the liquid saturation as it affects the mobility of the two phase flow, thereby preventing the effective modeling of well productivity. In this study, a pred...

Gas holdup and mixing time were characterized in a forced circulation internal loop draft-tube reactor (unaerated aspect ratio≈ 6, downcomero-riser cross-sectional area ratio = 0.493) as functions of the forced liquid superficial velocity in the riser (ULr) and the gas superficial velocity in he riser (UGr). Data were obtained in air–water system. The operation ranges were 0≤ULr ≤ 0.051 m/s and...