Quaternized palm kernel shell was successfully prepared by reacting with N-(3-chloro-2hydroxypropyl)trimethylammonium chloride in basic condition. Adsorption experiments of Reactive Red E (RRE) dye were carried out in single batch system studied at various initial concentration, contact time and pH at 25°C. It was found that at pH 4 quaternized palm kernel shell showed the highest dye removal p...

in the present investigation, shells of pistachio are used as adsorbents and they have been successfully used for the removal of blue 56, from water samples. the effect of various parameters such as: ph, amounts of adsorbents, size of adsorbent particles and contact time on removal processing were investigated. in this study freundlich absorption isotherms and langmuir were investigated . the e...

The removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. The results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. The results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution withi...

synthetic dyes are among the most common contaminants of the environment. therefore, the aim of this study was investigation the removal of basic blue 41 (bb41) and methylene blue (mb) from industrial effluents by useing raw and modified rice stems. in this study raw and modified rice stems treated chemically with citric acid (ca) and were used to explore the potentiality of rice stems for remo...

The adsorption ability of Dowex Optipore L493 resin modified with Aliquat 336 (MR), activated carbon modified with Aliquat 336 (MAC) and sawdust modified with Aliquat 336 (MS) for removal of Cr(VI) from aqueous solution in batch system was investigated. The effects of operational parameters such as adsorbent dosage, initial concentration of Cr(VI) ions, pH, temperature and contact time were stu...

Background: Synthetic dyes are serious pollutants and wide ranges of methods have been employed for their removal from aquatic systems. We studied the adsorption of "Nile blue A" (NBA), an anionic dye, from aqueous solution by oxidized multi-walled carbon nanotubes (MWCNTs). Methods: Scanning electron microscope and Fourier transform infrared spectroscopy were used to characterize ...

introduction: colored compounds which often are toxic and carcinogen is one of the environmental pollutants. these pollutants should be removed prior than discharge to the environment. the aim of this study was the evaluation of maize tassel powder efficiency for the removal of reactive red 198 dye from synthetic textile wastewater. materials & methods: this experimental study was performed in ...

background: the efficacy of nh4cl-induced activated carbon (nac) was examined in order to adsorb rr198, an azo reactive model dye, from an aqueous solution. methods: the effects of ph (3 to 10), adsorbent dose (0.1 to 1.2 g/l), dye concentration and contact time on the adsorption efficiency were investigated. results: the results showed that the removal of dye was highest at a solution ph of 7 ...

In the present study, removal of dibenzothiophene (DBT) from model oil (n-hexane) was investigated using magnetic activated carbon (MAC) nano-composite adsorbent. The synthesized nano-composite was characterized by FT-IR, FE-SEM, BET and VSM techniques. The MAC nano-composite exhibited a nearly superparamagnetic property with a saturation magnetization (Ms) of 29.2 emu g-1...

Hydrous stannic oxide (HSO) was synthesized in the laboratory and its systematic Cr (VI) adsorption behaviour was studied by means of batch experiments. The particle size of HSO used was in the range of 140 to 290μm. The variable parameters viz. the effects of pH, concentration of Cr (VI) and time of contact etc. are here reported. The optimum pH and time of contact required for maximum adsorpt...