In this study, the effect of ultrasound irradiation on the flux recovery and fouling mitigation for the membranes made of the polysulfone by the phase inversion method were investigated. Two ultrasound irradiation regimes, including inside and outside the module, were chosen for this study. The experiments were conducted to investigate the effect of ultrasound irradiation on the membrane struct...

Humidification process is one of the applications of membrane contactor in which partial pressure of a vapor in the gas stream increases. In this study, two different polyethersulfone and polyetherimide hollow fiber membranes were fabricated and characterized by various test methods and their performance in humidification process under different operating conditions was investigated. The PES me...

In the present study, mixed matrix PES/zeolite nanoparticles nanofiltration membranes were prepared via the solution casting technique. The effect of zeolite concentration on the PES membrane performance and its properties was studied. Cross-sectional scanning electron microscope (SEM) observations showed that the porosity in the membrane sub-layer was increased with addition of zeolite into th...

background and objectives: pomegranate juice (pj) contains large particles that stick to evaporator walls causing off flavors in the concentrate due to burning. microfiltration is used to clarify pj. fouling is a limiting phenomenon that can prevent the industrialization of membrane clarification. changes in the geometry of the membrane module such as using baffles are useful to decrease this p...

a membrane bioreactor (mbr) system based on a dead-end immersed hollow fiber membrane and filamentous fungus aspergillus oryzae were used for treatment of baker’s yeast wastewater. the fungus was adapted to the wastewater in the bioreactor for two weeks before starting the continuous process. average organic loading rate of 4.2 kg cod/m3.d was entered the bioreactor. mbr system was able to redu...

A palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. The ceramic support surface was modified by two TiO2-boehmite and one γ-alumina layers to avoid Pd penetration in support pores. Thin and defect-free Pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using Pd nanopa...

the pomegranate juice with high nutritional value has turbid appearance that makes it difficult to preserve and concentrate. microfiltration is useful process which can clarify it. one of the most important problems in this process is fouling phenomenon which affected by several parameters. the effects of fluid velocity, transmembrane pressure, membrane type and its pore size on membrane foulin...

   In this research, the classical phase inversion method was used to produce the polysulfone (PSF) membrane by using three different solvents: N, N-dimethylformamide (DMF), chloroform (CHCL3) and tetrahydrofuran (THF). Furthermore, different concentrations of functionalized multi – walled carbon nanotubes (MWCNTs) were added to PSF membranes by the classical phase inversion method...

In this study, novel polycarbonate-titanium oxide nanotubes (PC-TNT) ultrafiltration mixed matrix membranes (MMMs) were fabricated for decontamination of Cd2+ and Cu2+ metal ions from aqueous solution. The weight percent of TNTs in the polycarbonate membrane matrix was changed from 0 to 15. The synthesized neat PC membrane and PC-TNTs MMMs were characterized with respect to structural morpholog...

The aim of the present work is to enhance the antifouling properties of polypropylene (PP) membrane based on hydrophilicity improvement. Different contents of neat and modified nanodiamond (0.25, 0.50, 0.75 and 1.00 wt.%) were embedded into PP membranes. Nanodiamond nanoparticles were carboxylated by heat treatment method and the presence of carboxyl functional groups on the surface of nanopart...