The evolution of the pyrolysis of sewage sludge in a fixed and a fluidized bed was analyzed using a novel measuring technique. This original measuring technique consists of installing the whole reactor over a precision scale, capable of measuring the mass of the complete reactor with enough precision to detect the mass released by the sewage sludge sample during its pyrolysis. The inert conditi...

Several investigations have been devoted towards understanding the coating process in fluidized beds. Most of these studies focused on spraying liquid droplets over the bed. However, due to the complexity of these systems, more investigations are still required to quantify the effect of operating conditions on the coating criteria. The present work aims at fundamentally understanding and pr...

The drying or dehydration is the controlled heating of food products to evaporate quantified amount of moisture that is originally present in it. Drying of food products is essential to enhance the shelf life of the product without quality losses over an extended period of time. It is an energy intensive process. The fluidized bed dryer with heat pump is one of the efficient method to reduce th...

The conversion of various solid low-cost fuels into valuable gas with high energy content is attracting increasing interest within the chemical industry and the energy supply sector. For the gasification of carbonic fuels, fluidized bed processing based on the dual fluidized bed concept is utilized preferably. Dual fluidized bed gasification technology greatly intensifies the conversion of the ...

Gas-liquid-solid fluidized bed technique has emerged recently as one of the most promising one for three phase operations involved in chemical, biochemical, petrochemical, pharmaceutical processing industries. Out of the fundamental characteristics of a three-phase fluidized bed, the gas hold up and liquid hold up behaviours have been studied extensively. Considering the various researchers’ fi...

In this research, heat transfer of a poly Ethylene fluidized bed reactor without reaction were studied experimentally and computationally at different superficial gas velocities. A multifluid Eulerian computational model incorporating the kinetic theory for solid particles was developed and used to simulate the heat conducting gas–solid flows in a fluidized bed configuration. Momentum exchange ...

Effect of scale on the hydrodynamics of gas-solid fluidized beds was investigated in two fluidized beds of 152 mm and 78 mm in diameter.  Air at room temperature was used as the fluidizing gas in the bed of sand particles. The Radioactive Particle Tracking (RPT) technique was employed to obtain the instantaneous positions of the particles at every 20 ms of the experiments. These data were u...

The presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. Moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. The aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coeff...

Modeling and measurement of bubble size in a rotating fluidized bed (RFB) were conducted. The model for predicting the bubble growth in RFB has been proposed based on the following concepts: (i) local centrifugal acceleration and excess gas velocity are considered as the parameters in the radial direction, and (ii) bubble volume flow locally changes depending on the radial distance. Bubbling be...

Coal is a major energy source, and on the other hand coal is a source of pollution. Some of the important environmental issues related to use of coal in energy production are the release of sulphur dioxide (SO2). SO2 is a precursor to acid rain, responsible for atmospheric pollution and damage to human health. Therefore, investigations and development of technologies promising low SO2 emission ...