Flotation deinking of old newsprint (ONP) using polydiallyldimethylammonium chloride (polyDADMAC) as the only deinking agent was studied. The results demonstrate that polyDADMAC can neutralize dissolved anionics to form small particles. These small particles, together with ink, filler, and fines, strongly adsorbed onto air bubble surfaces and functioned as particle foaming agents. Therefore, no...

Retiming is a transformation that optimizes a sequential circuit by relocating the registers. When the circuit has an initial state, one must compute an equivalent initial state for the retimed circuit. In this paper we propose a new efficient retiming algorithm for performance optimization. The retiming determined by the algorithm is the best with respect to initial state computation. It is th...

-Flotation coefficients are usually determined from data obtained under high pressure (cell bottom) conditions. A power series expansion is proposed for correction to atmospheric pressure (meniscus) conditions. The same expansion may be applied to the concentration correction of flotation coefficients. From sedimentation experiments with polymer solutions in the analytical ultracentrifuge, we c...

Rubinstein J (1995) Cohtmn Flotation: Processes, Designs and Practices. New York: Gordon and Breach. Schubert Hand Bischofberger C (1979) On the optimization of hydrodynamics in flotation processes. In: Laskowski J (ed.) Proceedings of the 13th International Mineral Process Congress, pp. 1261-1287. Warsaw: Elsevier. Wills BA (1992) Introduction to Mineral Processing Technology, 5th edn, pp. 558...

Abstract This study takes lead-zinc flotation tailings as the research object. The process of “tailings regrinding-lead-zinc mixed floatation-activation zinc separation” is used to comprehensively recover valuable metal elements from original tailings. results show that grinding fineness -74 μm under condition m accounts for 82%; recovery rates lead and in concentrate obtained open-circuit test...

The paper discusses two procedures of flotation of difficult-to-float oxidized coal. The first one is the normal flotation procedure which relies on wetting coal with water followed by addition of flotation reagents (dodecane, dodecyl tetraoxyethelene ether (C12E4), and 1-pentanol). The second, direct contact procedure consists of mixing pure reagents with dry coal followed by addition of water...

In this work, a newly fabricated organic solar cell based on a composite of fullerene derivative [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) and regioregular poly (3-hexylthiophene) (P3HT) with an added interfacial layer of AgOx in between the PEDOT:PSS layer and the ITO layer is investigated and an equivalent circuit model is proposed for the device. Incorporation of the AgOx interfacial...

The residence time of liquid and solid was determined in flotation banks of mechanical cells and flotation columns at Salvador Division, Codelco-Chile. The estimation was developed from residence time distribution (RTD) measurements using radioactive tracers. Results allowed the estimation of effective pulp volumes in flotation banks and columns. It was found that industrial flotation banks are...