In this work, a new poly (3-hexylthiophene):1.00 mol% Au-loaded zinc oxide nanoparticles (P3HT:Au/ZnO NPs) hybrid sensor is developed and systematically studied for ammonia sensing applications. The 1.00 mol% Au/ZnO NPs were synthesized by a one-step flame spray pyrolysis (FSP) process and mixed with P3HT at different mixing ratios (1:1, 2:1, 3:1, 4:1, and 1:2) before drop casting on an Al2O3 s...

We investigated the direct electrochemistry of glucose oxidase (GOx) at gelatin-multiwalled carbon nanotube (GCNT) modified glassy carbon electrode (GCE). GOx was covalently immobilized onto GCNT modified GCE through the well known glutaraldehyde (GAD) chemistry. The immobilized GOx showed a pair of well-defined reversible redox peaks with a formal potential (E(0)') of -0.40V and a peak to peak...

Vulcan XC-72 carbon black particles (average size: ca. 50 nm) was incorporated into polyaniline (PANI) matrix by an electrochemical codeposition technique during the electropolymerization process. The doping by carbon particles leads to a higher polymeric degree and a lower defect density in the PANI structure. Furthermore, the incorporation of carbon particles not only increases the electroche...

This work presents the absorptance of high-temperature superconducting YBa Cu O 2 3 7 d I 1 ( ) YBCO films, deposited on Si substrates, in the far infrared from 15 to 95 cm ( ) ( wav elength from 667 to 105 m m at temperatures of 100, 200, and 300 K i.e., in the ) normal state . Our experiments show a significant difference in the absorptance for radiation incident on the film side as compared ...

A type of conductive graphite/cellulose composite film used for chemical vapor-sensing material was prepared at room temperature in the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIm]Cl). Graphite was pretreated with both oxidation and reduction processes. Due to the use of N,N-carbonyldiimidazole (CDI), as a covalent cross-linking agent in [BMIm]Cl, there were limited chemical bonds ...

This paper describes the use of several methods of template stripping (TS) to produce ultraflat films of silver, gold, palladium, and platinum on both rigid and polymeric mechanical supports: a composite of glass and ultraviolet (UV)-curable adhesive (optical adhesive, OA), solder, a composite of poly(dimethyl siloxane) (PDMS) and OA, and bare OA. Silicon supporting its native oxide layer (Si/S...

The goal of this work is to develop and investigate the properties of a new type of multifunctional composite which is based on multi-walled carbon nanotubes (MWCNT). The composite was prepared from a MWCNT “bucky paper” film which was sandwiched between two adhesive layers. Both two point probe and four point probe methods were used to test its mechanical strain sensing properties. The Young’ ...

Gas sensors play vital role in detecting, monitoring and controlling the presence of hazardous and poisonous gases in the atmosphere at very low concentrations. The composite prepared by mixing carbon black with PMMA has very good gas sensing applications. The gas sensors based on Carbon nanotube / polymer, ceramic and metal oxide, epoxide, polyimide, PMMA / BaTiO3 and SnO2 have also been devel...

The effects of poly(lactic acid) (PLA)-based film with inorganic antimicrobial nano-TiO₂ and nano-Ag on the physicochemical and microbial quality of Tremella aurantialba stored at 4 ± 1 °C for 16 days was investigated. Rosemary essential oil (REO, 9 wt %) was added into PLA film as plasticizer. Low-density polyethylene (LDPE) and PLA film was used as the controls. The experiment measured physic...

In this work, polyamide (PA)/silica nanocomposite films prepared by dissolution method of composite mixing were investigated. The morphology of nanocomposite films were characterized using scanning electron microscope (SEM), reveals that nano silica powder were uniformly dispersed on PA silica nanocomposite film. Chemical composition of film was confirmed by Fourier transform infrared spectrosc...