In this paper, design-oriented field effect transistor (FET) models are produced. For this purpose, FET modeling is put forward as a constrained, multiobjective optimization problem. Two novel methods for multiobjective optimization are employed: particle swarm optimization (PSO) uses the single-objective function, which gathers all of the objectives as aggregating functions; and the nondominat...

This work describes the construction of a sensitive, stable, and label-free sensor based on a dual-gate field-effect transistor (DG FET), in which uniformly distributed and size-controlled silicon nanowire (SiNW) arrays by nanoimprint lithography act as conductor channels. Compared to previous DG FETs with a planar-type silicon channel layer, the constructed SiNW DG FETs exhibited superior elec...

Utilizing the coupled piezoelectric and semiconducting dual properties of ZnO, we demonstrate a piezoelectric field effect transistor (PE-FET) that is composed of a ZnO nanowire (NW) (or nanobelt) bridging across two Ohmic contacts, in which the source to drain current is controlled by the bending of the NW. A possible mechanism for the PE-FET is suggested to be associated with the carrier trap...

Transistor-based nanoelectronic sensors are capable of label-free real-time chemical and biological detection with high sensitivity and spatial resolution, although the short Debye screening length in high ionic strength solutions has made difficult applications relevant to physiological conditions. Here, we describe a new and general strategy to overcome this challenge for field-effect transis...

Silicon nanowires (Si NW) are ideal candidates for low-cost solution processed field effect transistors (FETs) due to the ability of nanowires to be dispersed in solvents, and demonstrated high charge carrier mobility. The interface between the nanowire and the dielectric plays a crucial role in the FET characteristics, and can be responsible for unwanted effects such as current hysteresis duri...

There is a tunable band gap in ABC-stacked few-layer graphene (FLG) via applying a vertical electric field, but the operation of FLG-based field effect transistor (FET) requires two gates to create a band gap and tune channel’s conductance individually. Using first principle calculations, we propose an alternative scheme to open a band gap in ABC-stacked FLG namely via single-side adsorption. T...

Carrier mobilities in poly(3-alkylthiphene) cast films have been studied by means of fabricating a field effect transistor (FET) at the field range of (0.4–1.6)×104 V/cm. It is found that the regioregurality is markedly effective to the mobilities than the side chain length. The FET mobilility of the regioregular poly(3-hexylthiophene), PHT is approximately 3×10−3 cm2/Vs which is larger than th...

A heterojunction Mott field effect transistor (FET) is proposed that consists of an epitaxial channel material that exhibits an electron correlation induced Mott metal-to-insulator transition. The Mott material is remotely (modulation) doped with a degenerately doped conventional band insulator. An applied voltage modulates the electron transfer from the doped band insulator to the Mott materia...

© 2009 Apinunt Thanachayanont et al. 243 ABSTRACT⎯A novel ultra-low-power readout circuit for a pH-sensitive ion-sensitive field-effect transistor (ISFET) is proposed. It uses an ISFET/reference FET (REFET) differential pair operating in weak-inversion and a simple current-mode metal-oxide semiconductor FET (MOSFET) translinear circuit. Simulation results verify that the circuit operates with e...

In this study, a model of a Schottky-barrier carbon nanotube fieldeffect transistor (CNT-FET), with ferromagnetic contacts, has been developed. The emphasis is put on analysis of current-voltage characteristics as well as shot (and thermal) noise. The method is based on the tight-binding model and the nonequilibrium Green’s function technique. The calculations show that, at room temperature, th...