The correlation between the mechanical properties of Fillers/Epoxy composites and their tribological behavior was investigated. Tensile, hardness, wear, and friction tests were conducted for Neat Epoxy (NE), Graphite/Epoxy composites (GE), and Data Palm Fiber/Epoxy with or without Graphite composites (GFE and FE). The correlation was made between the tensile strength, the modulus of elasticity,...

The compressive response of a three-dimensional (3D) non-interlaced composite comprising three orthogonal sets of carbon fibre tows within an epoxy matrix is analysed. First, the compressive response is measured in three orthogonal directions and the deformation/failure modes analysed by a combination of X-ray tomography and optical microscopy. In contrast to traditional unidirectional and two-...

Un-doped and Cd-doped ZnZrO3/ZnO/ZrO2 nano composites (CDZZ-NCPs) (CD0-4) were synthesized by the hydrothermal method. The nano composites were characterized by various techniques such as Fourier Transform Infra-Red spectroscopy (FT-IR), X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM) and Energy Dispersive X-Ray Analysis (EDS). The photocatalytic properties of CDZZ...

Braided composites have been used widely in many engineering fields where the high mechanical characteristics and light weight properties were important. In order to estimate the mechanical characteristics of the braided composites, the numerical technique is very effective to reduce the testing and production costs. However, if the architecture of fiber bundle is more complex such as 3-D braid...

In this work, the effect of graphene oxide nanosheet (GONS) additives on the properties of cement mortar and ultra-high strength concrete (UHSC) is reported. The resulting GONS-cement composites were easy to prepare and exhibited excellent mechanical properties. However, their fluidity decreased with increasing GONS content. The UHSC specimens were prepared with various amounts of GONSs (0-0.03...

The outlook for improving the energy product of permanent magnets beyond the theoretical limit of 516kJ/m3 for Nd,Fe,,B is discussed. Most promising are nanostructured two-phase magnets consisting of an aligned hard-magnetic skeleton phase possessing exceptionally high uniaxial anisotropy and a soft-magnetic phase which assures a high magnetization. Brown’s paradox is discussed for inhomogeneou...

Ni-Fe alloy/ZnO nanorod composites were fabricated and the magnetoelectric effect was demonstrated. The ZnO and Ni-Fe alloy serve as the piezoelectric phase and the magnetostrictive phase in the nanocomposite, respectively. Since the nanorod structure possesses the inherent nature of a large surface-to-volume ratio, it greatly enhances the interplay between the piezoelectric and magnetostrictiv...

We present a Finite Element (FE) approach to model the conductivity and strain-sensing capabilities of Carbon Nanotube (CNT) reinforced polymer composites. A periodic Representative Volume Element (RVE) is constructed based on measurable statistical descriptors of the microstructure, and its response is simulated by concurrent electrical and mechanical FE analyses; the scatter of the prediction...

B4C and its composites with TiB2 as second phase continues to be extensively used as the preferred ceramic material in military applications as armor systems for absorbing and dissipating kinetic energy from high velocity projectiles. It also exhibits a high melting point (2427 °C), and high neutron absorption cross section. Pressureless sintering of the B 4C-nanoTiB2 nanocomposite using small ...

We report the use of a simple yet highly effective magnetite-waste tea composite to remove lead(II) (Pb(2+)) ions from water. Magnetite-waste tea composites were dispersed in four different types of water-deionized (DI), artificial rainwater, artificial groundwater and artificial freshwater-that mimic actual environmental conditions. The water samples had varying initial concentrations (0.16-5....