Removal of cesium from synthetic aqueous solution through adsorption on bentonite, under batch equilibrium experimental condition at different values of pH and four temperatures (303, 313, 323, 333 K) was investigated. For this propose the suitability of the Freundlich adsorption model for equilibrium data were investigated. The parameters in the adopted adsorption isotherm models were determin...

Sawdust is obtained from naturally and easily available which is biodegradable. The bio sorption capacity of the sawdust for hexavalent chromium was studied at different solution pH values (1.5-6), initial metal concentration (50450 mg/L), adsorbent dose (1-7 g/L). The maximum adsorption of Cr (VI) is obtained at pH 1.5, initial concentration 50 ppm and adsorbent dose 5 g/l. The adsorption of c...

Abstract The accurate calculations of adsorption equilibrium for multicomponent gas systems are of great importance in many applications. In this paper, five two-dimensional equations of state 2D-EOS, i.e. Van der Waals, Eyring, Zhou-Ghasem-Robinson, Soave-Redlich-Kwong and Peng-Robinson, were examined to find out their abilities to predict adsorption equilibrium for pure and multi-component ga...

The performance of activated sludge in the removal of tetradecyl benzyl dimethyl ammonium chloride (C14BDMA) by adsorption from aqueous solution was investigated with different PH, contact time, ionic strength and temperature. Equilibrium was achieved within 2 h of contact time. The adsorption capacity increased largely with increasing solution pH and remained constant above pH 9. The ionic str...

The removal of tributyltin (TBT) from artificial seawater using nZnO, activated carbon and nZnO/activated carbon composite was systematically studied. The equilibrium and kinetics of adsorption were investigated in a batch adsorption system. Equilibrium adsorption data were analyzed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherm models. Pseudo first- and second-order...

The entrance of Cd (II) to aqueous environments causes a major problem to human health. The current article examines the efficiency of TiO2 and γ-Al2O3 nanoparticles in Cd (II) removal from aqueous medium as influenced by different chemical factors, such as pH, initial concentration, background electrolyte, and ionic strength, in accordance with standard experimental methods. It conducts Batch ...

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...

The rate of reaction of trace metals between soils and solutions is important in predicting trace metal behavior as equilibrium may not be attained. Although chemical equilibrium models are commonly used for soil systems, there has been less progress in developing predictive kinetic models. Kinetics of Zn adsorption/desorption have been modeled based on the linear adsorption isotherm assumption...

Background: Synthetic dyes are serious pollutants and wide ranges of methods have been employed for their removal from aquatic systems. We studied the adsorption of "Nile blue A" (NBA), an anionic dye, from aqueous solution by oxidized multi-walled carbon nanotubes (MWCNTs). Methods: Scanning electron microscope and Fourier transform infrared spectroscopy were used to characterize ...

The effective removal of dyes from aqueous wastewaters is among the most important issues formany industrialized countries. Removal of Congo Red (CR) dye from aqueous solutions was studiedusing nickel oxide nanoparticles. The operating variables studied were initial pH of solution,adsorbents dosage, temperature and contact time. The morphological information of nickel oxidenanoparticles were ch...