The dephosphorization slag has a great potential as the secondary resources of manganese and phosphorus, while quite a large amount of slag is landfilled and simply reused such as cement. The objective of this study is to investigate the recovery of manganese and phosphorus by wet magnetic separation technique. The hot metal pretreatment slag (dephosphorization slag) generally contains a Ca3P2O...

This paper focuses on research concerning the ecotoxicological properties of granulated slag from the pilot production of gray iron with red mud addition and concrete composites with the application of this slag. Red mud is a hazardous waste generated in the production of aluminium oxide. Negative ecotoxicological tests are, therefore, one of the basic prerequisites for the ability to use granu...

Surface remelting/skin scanning of components is generally performed during the selective laser melting (SLM) process to improve the surface quality of a part. However, the chemical effects of surface remelting are not well understood. In this study, cuboidal parts fabricated with and without laser remelting were characterised using scanning electron microscopy (SEM), surface profilometry and X...

Some variables that influence the slag splashing phenomenon in an oxygen steelmaking converter are numerically analyzed in this work. The effect of lance height, jet velocity, jet exit angle and slag viscosity on the washing and ejection mechanisms of slag splashing is studied in this work employing twodimensional transient computational fluid dynamics simulations. A parameter here called avera...

Physical properties of molten slag such as viscosity, density and surface tension have a significant influence on the slag splashing process in an oxygen steelmaking converter. Particularly, viscosity determines the shear forces that rule droplets formation. Besides, stirring of the molten slag bath strongly depends on this property. In this work, the influence of viscosity on the efficiency of...

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

Department of Radiology, Stanford University, Stanford, CA 94305, USA The aim of this work is to demonstrate time of flight (ToF) performance from analog electro-optical transmission of SiPM-based PET detector signals. In electro-optical readout schemes, scintillation signals are converted to near-infrared light by a laser diode and transmitted out of the MRI bore with fiber-optics [1], greatly...

As a valuable byproduct of iron-making process, blast furnace slag contains tremendous amount of sensible heat. Granulation of blast furnace slag is the first step for its heat recovery. Due to environmental and energy issues, dry centrifugal granulation has received a considerable amount of attention. However, the flight dynamics of blast furnace slag, which is of great importance for size des...