Polyamide polymers have moderate mechanical properties, excellent wear resistant properties, and solvents. However, polyamides have some disadvantages such as notch sensitivity and high water absorption. Generally, polyamides are ductile in the un notched state but they show brittle behavior in the state of notched impact. Some disadvantages of polyamides can be improved by some fillers and add...

This paper introduces a finite element scheme and a systematic calibration approach for masonry infilled RC frames. The modeling scheme combines the smeared crack approach with discrete crack elements to allow for the opening of diffused flexural and dominant shear cracks. It is, therefore, able to capture the nonlinear material behavior and the interaction of the infill wall with the bounding ...

The failure process ahead of a mode I crack advancing in a ductile thin metal plate or sheet produces plastic dissipation through a sequence of deformation steps that include necking well ahead of the crack tip and shear localization followed by a slant fracture in the necked region somewhat closer to the tip. The objective of this paper is to analyze this sequential process to characterize the...

Scratches are deleterious to precision optics because they can obscure and modulate incident laser light, which will increase the probability of damage to optical components. We here imitated the generation of brittle and ductile scratches during polishing process and endeavored to find out the possible influence of scratches on laser induced damage. Brittle scratches can be induced by spiking ...

Precracked and notched specimens were used to investigate the fracture mechanism of a bainite steel at low temperature. The critical fracture event was studied using metallographic sectioning method. The results showed that the critical cleavage event was different in the precracked and the notched specimens. At -196C, all specimens fractured at lower-shelf region without any ductile crack grow...

We present a model for the brittle–ductile transition in ferritic steels based on two dimensional discrete dislocation simulations of crack-tip plasticity. The sum of elastic fields of the crack and the emitted dislocations defines an elasto–plastic crack field. Effects of crack-tip blunting of the macrocrack are included in the simulations. The plastic zone characteristics are found to be in a...

Masonry infill walls are often used as non-structural elements. According to the past structural failure, ignorance of interaction between infill walls and enclosed frame may lead to the different seismic response for non-ductile building frames. The main contribution of this paper is to analytically investigate the behavior of reinforced concrete with masonry infill panels as participating str...

490 MRS BULLETIN/JULY 2002 nated by intergranular fracture, while in AJM it was in a manner resembling ductile behavior. Improved surface finishing by AJM resulted in a 15% improvement in flexural strength, compared with both ground and ground-plus-lapped samples. The researchers concluded that a higher compressive residual stress observed on the AJM-processed surface, combined with the smoothe...

A basic micromechanical model for deformation of solids with only one tuning parameter (weakening epsilon) is introduced. The model can reproduce observed stress-strain curves, acoustic emissions and related power spectra, event statistics, and geometrical properties of slip, with a continuous phase transition from brittle to ductile behavior. Exact universal predictions are extracted using mea...

We report tensile experiments on Ni80P20 metallic glass samples fabricated via a templated electroplating process and via focused ion beam milling, which differed only in their surface energy states: Ga-ion-irradiated and as-electroplated. Molecular dynamics simulations on similar Ni80Al20 systems corroborate the experimental results, which suggest that the transition from brittle to ductile be...