An in-line chemical gas sensor was proposed and experimentally demonstrated using a new C-type fiber and a Ge-doped ring defect photonic crystal fiber (PCF). The C-type fiber segment served as a compact gas inlet/outlet directly spliced to PCF, which overcame previous limitations in packaging and dynamic responses. C-type fiber was prepared by optimizing drawing process for a silica tube with a...

A fiber-optic anemometer based on fiber Bragg gratings (FBGs) is presented. A short section of cobalt-doped fiber was utilized to make a fiber-based "hot wire" for wind speed measurement. Fiber Bragg gratings (FBGs) were fabricated in the cobalt-doped fiber using 193 nm laser pulses to serve as localized temperature sensors. A miniature all-optical fiber anemometer is constructed by using two F...

Fiber Raman amplification using the transmission line is a promising technology to increase the repeater distance as well as the capacity of the communication systems. Because of the growing importance of fiber Raman amplification, it is desired to predict the magnitude and shape of the Raman gain spectrum from the doping level and refractive index profiles of different fiber designs. This thes...

Two-photon excited (TPE) side illumination fluorescence studies in a Rh6G-RhB dye mixture doped polymer optical fiber (POF) and the effect of energy transfer on the attenuation coefficient is reported. The dye doped POF is pumped sideways using 800 nm, 70 fs laser pulses from a Ti:sapphire laser, and the TPE fluorescence emission is collected from the end of the fiber for different propagation ...

Single-mode ytterbium-doped phosphate all-solid photonic crystal fiber (AS-PCF) with 13.8 W output power and 32% slope efficiency was reported. By altering the diameter of the rods around the doped core and thus breaking the symmetry of the fiber, a polarization-maintaining AS-PCF with degree of polarization of >85% was also achieved, for the first time to knowledge, in a phosphate PCF.

An ytterbium-doped photonic bandgap fiber amplifier operating at the long wavelength edge of the ytterbium gain band is investigated for high power amplification. The spectral filtering effect of the photonic bandgap efficiently suppresses amplified spontaneous emission at the conventional ytterbium gain wavelengths and thus enables high power amplification at 1178 nm. A record output power of ...

Tm-doped alkali germanate glass is investigated for use as a laser material. Spectroscopic investigations of bulk Tm-doped germanate glass are reported for the absorption, emission and luminescence decay. Tm:germanate shows promise as a fiber laser when pumped with 0.792 μm diodes because of low phonon energies. Spectroscopic analysis indicates low nonradiative quenching and pulsed laser perfor...

We report a unique all fiber-based single-frequency Q-switched laser in a monolithic master oscillator power amplifier configuration at ~1920 nm by using highly Tm-doped germanate fibers for the first time. The actively Q-switched fiber laser seed was achieved by using a piezo to press the fiber in the fiber Bragg grating cavity and modulate the fiber birefringence, enabling Q-switching with pu...

As light pulses propagate along the optical fiber, their energy dissipates. Beyond a certain distance the number of photons in pulses becomes too small to be detected. The optical pulses in fibers are energized by utilizing optical fiber amplifiers. The rapid growth of the internet and data traffic in optical fiber communication networks has stimulated the study of wideband optical amplifiers. ...

We report soliton pulse formation and amplification and soliton-self-frequency shifting in an anomalously dispersive, Yb31-doped holey fiber amplifier seeded with pulses from an Yb31-doped, 1.06-mm fiber based modelocked oscillator. Our fiber-based system provides a highly practical, all-diode-pumped, continuously tunable femtosecond pulse source operational in the important and difficult to re...