A number of studies currently focus on the renewable fuels to reduce the reliance on petroleum fuels. Biofuels such as biodiesel and bioethanol have been studied and tested in many countries including India. One of the methods to reduce the use of fossil fuel is blending ethanol with fossil diesel. However, an emulsifier or a co-solvent is needed to homogenize the diesel-ethanol blends. The ric...

This paper investigates the opportunity of using almond oil as a renewable and alternative fuel source. Different fuel blends containing 10, 30, and 50% almond biodiesel (B10, B30, and B50) with diesel fuel (B0) were prepared and the influence of these blends on emissions and some performance parameters under various load conditions were inspected using a diesel engine. Measured engine performa...

In the current work, a comprehensive study on the possibility of using methanol as an alternative fuel for diesel engines was carried out. Methanol was mixed at different ratios with diesel fuel. The mixing ratios of methanol to diesel were 0:100, 10:90, 20:80 and 30:70. The effects of methanol fraction on engine power, torque, brake specific fuel consumption (BSFC), brake thermal efficiency an...

The aim of this work was to study the combustion, performance, and emission characteristics of a 5.5 kW four-stroke single-cylinder water-cooled direct-injection diesel engine operated with blends of biodiesel-like fuel (BLF15, BLF20 & BLF25) obtained from a 50:50 mixture of transesterified waste transformer oil (TWTO) and waste canola oil methyl esters (WCOME) with petroleum diesel. The mixtur...

Biodiesel, the methyl ester of vegetable oil is a renewable, low environmental impact and potential as a green alternative fuel for diesel engine. High oil prices and growing concerns over climate change are driving investment and innovation in the biofuels sector as countries and industry increasingly look towards renewable bioenergy to replace fossil fuels. This study examines fuel properties...

This paper presents the technical performance measurements of biogas premixed charge diesel dual fuelled engine. A 4-stroke research diesel engine was used for the performance analysis. The performance parameters like engine brake power, brake specific fuel consumption, volumetric efficiency and brake thermal efficiency were measured and compared with conventional diesel with different proporti...

Start of fuel injection and fuel type are two important factors affecting engine performance and exhaust emissions in internal combustion engines. In the present study, a one-dimensional computational fluid dynamics solution with GT-Power software is used to simulate a six-cylinder diesel engine to study the performance and exhaust emissions with different injection timing and alternative fuels...

Vehicle Emission is one of the main causes of environmental damage. Vehicle engines produce carbon dioxide (CO2), hydrocarbon (HC), Nitrogen oxides (NOx) and many other harmful substances. An investigation was conducted using a compression-ignition engine fuelled with different ratios of blends of diesel and biodiesel at different EGR rates. The effects of different ratios of fuel blends and EG...

Because of high pressure fluctuations in Combination Electronic Unit Pump (CEUP) system during fuel injection cycles, physical properties of diesel fuel including density, acoustic wave speed and bulk modulus also vary. These physical properties of fuel have significant importance in predicting the fuel injection behavior and its optimization. A 1D viscous damped mathematical model of wave equa...

This paper presents an experimental investigation into the detection of excessive diesel knock using acoustic emission (AE) signals. Three different dual-fuel diesel engine operating regimes were induced into a compression-ignition (diesel) engine operating on both straight diesel fuel and two different mixtures of fumigated ethanol and diesel. The experimentally induced engine operating regime...